User Manual

Restoring to Default Settings
29
Mini Fixed Rugged Dome
Press and hold the default button for about 8 seconds. Release the default
button when the
status LED blinks. For details, see Box Camera, 29.2
Directly on the Camera
.
Status LED
Default button
IR Arctic Box Camera
Note the following procedure is only applicable to GV-BX2510-E / 5310-E.
To restore default settings of other IR Arctic Box Cameras, access the load
default function from its Web interface. For details, see
Tools, Administrator
Mode
, Chapter 4, GV-IPCam Firmware Manual.
Press and hold the
default button for about 8 seconds. Release the default
button when the
status LED blinks. For details, see Box Camera, 29.2
Directly on the Camera
.
Default button
Status LED
289