User Manual

• Wireless Connection: Optionally purchase and connect the

GV-WiFi Adapter.

3. Optionally connect a speaker and an external microphone.

4. Optionally connect a monitor using a Video Out wire. Enable this

function by selecting your signal format at the TV Out field on the Web

interface. See TV Out setting, in the Video Settings section,

Administrator Mode Chapter, GV-IPCAM Firmware Manual on the

Software DVD.

5. Optionally connect to input / output devices or an infrared illuminator.

For details, see Infrared Illuminator and I/O Terminal Block, Box

Camera Chapter, GV-IPCAM Firmware Manual on the Software DVD.

6. Connect power using one of the following methods:

• Plug the power adapter to the power port.

• Use the Power over Ethernet (PoE) function and the power will be

provided over the network cable.

7. The status LED of the camera will be on.

8. You are ready to access the live view and adjust the image clarity. See

25. Accessing the Camera in the Quick Start Guide.

Note: For details on limitations and requirements of the mini USB port,

refer to Note for USB Storage and WiFi Adapter at the beginning of this

quick guide.