User Manual

6.2 Overview
1
3
2
5
d
a
b
6
c
7
4
8
No. Name Description
1. Lens Receives image inputs.
2. Pan Screw Loosens the screw to adjust pan angle.
3. Tilt Screw Loosens the screw to adjust tilt angle.
4. Default Button
Resets the camera to factory default. See 29.
Restoring to Default Settings in the Quick Start
Guide.
5. DC 12V Port Connects to power.
6. LAN / PoE Connects to a 10/100 Ethernet or PoE.
7.
Audio and I/O
Terminal
Block
Connects the camera to a microphone or a
speaker and to one input and one output devices
using audio and I/O extended cable. For
details, see 6.4 Connecting the Camera.
8.
Memory Card
Slot
Inserts a micro SD card (SD/SDHC/SDXC/UHS
I, Class 10) to store recording data. Note UHSII
card type is not supported.
a Status Turns on (green) when the system is ready.
b Power Turns on (green) when power is on.
c Link Turns on (green) when the network is connected.
d ACT
Turns on (orange) when data are being
transmitted.
50