Installation Sheet

D460024/D460025

D460026/D460027

D460035/D460036 D460055/D460056D460030 D461193

D460004/D460071

D460003

D451289 D451279 D461160 D461672

D460029/D460023

D462058/D460057

D460058/D460158

D460041/D460042

D460043/D460044

D460051/D460052

D460054

D460046/D460047

D460048

Need Help? Please call our toll-free Customer service line at 1-888-328-2383 or WWW.DANZE.COM for additional assistance or service.

Requiere asistencia? Favor llamar a nuestro servicio a clientes sin costo al 1-888-328-2383 o WWW.DANZE.COM para asistencia adicional o servicio.

Besoin d’aide? Veuillez communiquer avec notre service à la clientèle au numéro sans frais 1-888-328-2383 ou WWW.DANZE.COM pour obtenir du

service ou de l’aide additionnels.

Showerheads

Cabeza de ducha

Pomme de douche

PAGE 1
Showerheads Cabeza de ducha Pomme de douche D460024/D460025 D460026/D460027 D460035/D460036 D460004/D460071 D462058/D460057 D460058/D460158 D460041/D460042 D460043/D460044 D460051/D460052 D460054 D460046/D460047 D460048 D460030 D460029/D460023 D460055/D460056 D461193 D451289 D451279 D461160 D461672 D460003 Need Help? Please call our toll-free Customer service line at 1-888-328-2383 or WWW.DANZE.COM for additional assistance or service.
PAGE 2
Adjustable Wrench /Llave ajustable /Clé à molette Needle-nose Pliers /Alicates de extremos finos / Pince à bec effilé 1. Remove the existing showerhead from the shower arm. Clean the debris from the inside of the shower arm and the shower arm threads. Run water to flush the residual debris from the inside arm (Fig 1). 2. Wrap the threads of the shower arm with the plumber's tape (included) (Fig 2). 3. Attach the new showerhead to the shower arm by turning clockwise. Tighten with a wrench (Fig 3 & 4).
PAGE 3
the 1. Remove the showerhead from the shower arm by unscrewing the ball joint counter-clockwise (Fig 1). 2. The filter screen and flow controller are located at the opening of the showerhead ball joint (Fig 2). Unscrew the filter screen from the ball joint. If necessary, use your needle-nose pliers (Fig 3). 3. Use needle-nose pliers to grasp the flow controller and pull the flow controller out. Take care not to use excessive force when grasping the flow controller so as to avoid damage (Fig 4). 4.
PAGE 4