Installation

MARK CENTER LINES FOR LOCATION OF LAVATORY IN
SLAB OR COUNTER TOP.
1.
CUT OPENING IN COUNTER TOP CAREFULLY, FOLLOWING
PENCIL LINE YOU TRACED.
3.
MOUNT LAVATORY TO UNDERSIDE OF COUNTER TOP, ALIGNING
WITH CENTERLINE OF FAUCET DRILLING. GERBER ANCHOR
KIT #99-190 IS AVAILABLE TO SUPPORT THIS MOUNTING.
4.
CHECK DIMENSIONS OF INTENDED FAUCET BEFORE DRILLING.
NOTE: DUE TO SLIGHT DIMENSIONAL VARIATIONS WE
RECOMMEND USING LAVATORY AS A TEMPLATE TO
INSURE PROPER ALIGNMENT OF UNDERCOUNTER INSTALLATION.
5.
CUT OUT TEMPLATE AND WITH CENTER LINE ARROWS AS
A GUIDE, TRACE LINE ON COUNTER TOP.
2.
INSTRUCTIONS FOR MOUNTING
No. 13-740 LAVATORY
13
3
8CGE0093, REV. 11-2015
THIS TEMPLATE IS FOR 13-740 LAVATORY
13