User Manual

ManualsBrandsGEREE ManualsElectronicsVideo Doorbell Camera Wireless WiFi Smart Doorbell,32GB Preinstalled,GEREE 1080P HD Security Home Camera,Real-Time Video and Two-Way Talk,Night Vision,PIR Motion Detection 166° Wide Angle Lens

The batteries inside the doorbell are not fully charged in accordance with

transportation safety regulations.

Please charge the batteries with a USB compatible wall charger (not included)

and the provided USB cable for about 8~10 hours prior to Wi-Fi configuration

and installation.

Please install a battery for the doorbell

Press the [Bell] button to wake the device if it

is asleep

Please stay near your router for the best signal

Install Doorbell

9:55

· Using the supplied reset pin, reset the

device(please consult the user manual for more on

this)

· Wait for the LED indicator to flash RED

· Tap Next

Please reset the device

Install Doorbell

9:55

5. Battery charging

6. Download the app

7. wi-fi set up

Camera

Battery Camera Floodlight Camera

Network Video

Recorder

Doorbell

9:55

Devices Messages MeFriends

Tap + to add a new device

Devices

- 2 -

1. Tap on “+” to add device 2. Select doorbell 3. Check the power status

4. Reset the doorbell

Before you start the Wi-Fi configuration, please note below:

1). The doorbell works with 2.4 GHz Wi-Fi, but not with 5 GHz Wi-Fi.

2). Avoid using special characters or symbols like )(@~!#$%^&*..., either in your Wi-Fi name or password.

3). Perform the configuration near your Wi-Fi router.

Launch the CloudEdge APP and register an account with your mobile phone numer of email ID. Then start the Wi-Fi

Before you start the Wi-Fi configuration, please note below:

Download and install the 'CloudEdge' app from Google Play

or the

App Store

. The App is also available by scanning the QR codes on

the right, using your QR code scanner in your smart phone.

NOTE: Google Play

is a trademark of Google Inc. App Store

is a

service mark of Apple Inc.

Android

iOS

CloudEdge