User Manual

Install Doorbell
Press the [Bell] button, and tap Next
Help
Next
9:55
Select your Wi-Fi network
Change WiFi
Hide Password
Home
Password123
(Please select a 2.4G network, this device will not
work with 5G Wi-Fi networks)
Wi-Fi Setup
Next
9:55
Operation Scan QR Code
Scan the QR code below with the
device at a distance of 5-8 inches.
A tone will be heard when
successfully scanned.
Help Next
Next
9:55
Please remove all film from the lens. Tap
Next to show a QR code, and let your device
scan the code. Keep your phone 5-8 inches
from the lens.
8. run a test
Devices
9:55
056853326
9:55
Please stay near your router for the
best signal
Device Found!
Connecting device to network...
Registering device...
12%
connecting...
Connect Network
- 3 -
5. Activate the doorbell 6. Input Wi-Fi password
7. Prepare the scanning 8. Generate the QR code
9. Wait for Wi-Fi connection
10. Adding device succeeds
After setup, tap on the live view window in the app
for a test. Then take your doorbell outside to the
installation spot and run a test there. Make sure the
installation spot is covered by strong 2.4 GHz Wi-Fi
signal.
Note:
If the video quality from the doorbell outside is not as
good as it was indoors, you may need to move your
router closer to your installation spot, or invest in an
Wi-Fi extender.