User’s Manual
TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice.
Table of Contents Preface ........................................................................................ v Chapter 1 Getting Started .....................................................1-1 Getting the Computer Running................................................1-2 Unpacking ..........................................................................1-2 Connecting to AC Power ...................................................1-2 Opening the Cover ................................................
Windows Keys ...................................................................2-7 Function Keys ....................................................................2-8 Fn Key................................................................................2-8 Hot Keys ............................................................................2-8 Using the Touchpad ...............................................................2-10 Configuring the Touchpad ...............................................
Chapter 4 Expanding Your Computer..................................4-1 Connecting an External Monitor .............................................4-2 Connecting a TV......................................................................4-3 Connecting a USB Device .......................................................4-4 Using PC Cards .......................................................................4-5 PC Card Type.....................................................................
When Traveling .......................................................................7-6 Chapter 8 Troubleshooting................................................... 8-1 Preliminary Checklist ..............................................................8-2 Solving Common Problems .....................................................8-3 Solving Common Problems .....................................................8-4 Battery Problems................................................................
Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters, 2 appendices, and an index. Chapter 1, Getting Started, takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer, tells you how to use the computer’s components and features. Chapter 3, Managing Power, provides information on power.
Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires special attention. CAUTION: identifies important information which, if not followed, may result in loss of data or damage to the computer. Keyboard keys are shown in a bold typeset. For example: Press Enter to complete.
CHAPTER 1 Getting Started Congratulations on purchasing this computer. Your computer incorporates desktop computer capabilities into a compact notebook-sized package. It can greatly enhance your productivity either in the office or at home. And, of course, wherever you need it, the computer is ready and easy “to go.” This chapter first tells you step by step how to get the computer up and running.
Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter − AC power cord − Driver CD Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the computer in the future.
4. When the AC adapter is connected, power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack.
Turning On and Off the Computer Turning On 1. Make sure that the computer is connected to AC power. 2. Press the power button. 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start.
Turning Off To turn off the computer power, use the “Shut Down” command of your operating system. NOTE: There are other ways you can stop the computer so that you will be back to where you left off when you next turn on the computer. (See “Stopping the Computer” in Chapter 2 for information.) CAUTION: If you have to turn the computer on again immediately after turning it off, wait for at least five seconds. Turning the computer off and on rapidly can damage it.
Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. Right-Side Components Ref Component DVD/ DVD-RW/ Combo Drive 1-6 Description Accepts CD/DVD for installing or loading software, accessing data, and playing music/video. See Also P.
Left-Side Components Ref Component Description See Also VGA Port Connects an external monitor. P.4-2 Ventilation Openings Do not cover or block the ventilation openings for air circulation thus preventing overheating. USB Ports Each of the four ports connects a USB device, such as a floppy disk drive, printer, digital camera, joystick, and more. RJ-11 Connector Connects the telephone line. P. 2-22 RJ-45 Connector Connects the LAN cable. P.
Rear Components Ref 1-8 Component Description See Also Kensington Lock Locks the computer to a stationery object for security. P. 7-2 Power Connector Connects the AC adapter. P. 1-2 S-video Connector Connects an external video device, such as a TV, supporting S-video input. An S-video to AV cable comes with the computer for connecting an AV device. P.
Front Components Ref Component Description See Also Microphone Connector Connects an external microphone. P. 2-21 Audio Output Connector Connects a set of headphones, external speakers with amplifier, or an audio recording device. P. 2-21 Top Cover Latch Locks the top cover. Getting Started P.
Bottom Components Ref 1-10 Component Description Battery Pack Supplies power to your computer when external power is not connected. Mini PCI Slot Inside is the Mini PCI slot for using an optional Mini PCI card. Depending on your model, an internal Mini PCI wireless LAN card may have been pre-installed. CPU Compartment Inside is the CPU compartment of your computer. Memory Expansion Slot Inside is the memory slot of your computer.
Top-open Components Ref Component Description See Also LCD Screen Displays the output of the computer. P. 2-18 Wireless LAN Indicator Glows green when the computer is ready for WLAN connection. (This function works only if an optional Mini PCI wireless LAN card is installed.) P. 2-24 Power Indicator Glows green when the computer is on. P. 3-2 Blinks green when the computer is in Standby mode. Battery Charge Indicator Glows green when the battery is fully charged and connected to AC power. P.
Ref 1-12 Component Description See Also Stereo Speaker Set Sends out sound and voice from the computer. P. 2-20 Touchpad Serves as the pointing device of the computer. P. 2-10 Device Indicators Show the current status of the computer’s devices. DVD/DVD-RW/Combo drive in-use indicator P. 2-16 Hard disk drive in-use indicator P. 2-15 Num Lock indicator P. 2-4 Caps Lock indicator P. 2-5 Scroll Lock indicator P. 2-5 Microphone Receives sound and voice for the computer. P.
Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose... To know more about the computer... Do this... Go on to the next chapter. To install the operating system if your See the operating system manual. dealer has not already done so... To know more about the operating system... Read the operating system manual. To set a power-on password... See “Security Menu” in Chapter 5.
CHAPTER 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to notebook computers, you may choose to read only the parts containing information unique to your computer.
Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk and floppy disk. The computer will automatically load the OS after you turn it on. This process is called booting. NOTE: An operating system is the platform for all your software application programs to run on.
To stop in this mode... Hibernation Do this... To start up or resume again Depending on your settings in Windows, you can place the computer in Hibernation mode by: • Closing the display cover • Pressing Fn+F12 • Pressing the power button Press the power button. If you choose to stop in Standby or Hibernation mode, you can return to where you left off the next time you start up the computer. (See “Power Management” in Chapter 3 for more information.
Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus a Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys Typewriter keys are similar to the keys on a typewriter. Several keys are added, such as the Ctrl, Alt, Esc and lock keys, for special purposes.
Key Description Pressing Fn and this key toggles Scroll Lock on and off. When on light on), the screen moves one line up or down when you press ( ↑ or ↓ arrow key. Scroll Lock does not work for all programs. Pressing this key toggles the Caps Lock on and off. When on light on), the Caps Lock keeps the letter keys in uppercase. ( The Pause key temporarily stops screen scrolling. Scroll Lock does not work for all programs. The Print Screen key prints the displayed screen.
Key Description Moves the cursor left one space. Moves the cursor right one space. Moves the cursor up one line. Moves the cursor down one line. Moves the page up. Moves the page down. Moves the cursor to the beginning of the line or document. Moves the cursor to the end of the line or document. Switches typing between insert and overtype modes.
Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated, which means you can use these keys to enter numerals. NOTES: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can either turn Num Lock off or you can press Fn and then the letter without turning Num Lock off. Some software may not be able to use the numeric keypad on the computer. If so, use the numeric keypad on an external keyboard instead.
Function Keys On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. Hot key functions are assigned toF1, F3, F4, F5, F6, F7, F10, F11, and F12 by your computer. (See “Hot Keys” later in this chapter for information.) Fn Key The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key.
Key Description Decreases the volume. Increases the volume. Switches the display output to one of the following when an external device is connected. Upon booting the system with CRT: LCD CRT LCD & CRT NOTES: If the display mode is set to 256 colors or lower, or in DOS mode, there will be only two modes for selecting: CRT only and LCD & CRT. This function only applies to Plug & Play CRT monitors. Decreases the LCD brightness. Increases the LCD brightness. Switches Battery Low beep on and off.
Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double-click Press and release the left button twice in quick succession. –or– Tap twice on the pad rapidly. Drag and drop Press and hold the left button, then move your finger until you reach your destination (drag). Finally, release the button (drop) when you finish dragging your selection to the destination.
Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vise versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. To configure the touchpad, you can use the standard Microsoft or IBM PS/2 driver if you are using Windows.
Using the Floppy Disk Drive Depending on your model, an external floppy disk drive may be supplied with your computer. The floppy disk drive is referred to as drive A. A floppy disk drive allows you to install new programs into your computer, or to store information on a removable floppy disk so that you can transfer information from one computer to another. The floppy disk drive is a high-density 3.
NOTES: Depending on your model, there may be a core on the floppy disk drive cable. Do not put the floppy disk drive upside down. Do not put the AC adapter on the floppy disk drive. Inserting and Ejecting Floppy Disks To insert a floppy disk, hold it with the arrow facing up and towards the drive. Slide the disk into the drive until it clicks into place. Eject Button Indicator To eject a floppy disk, first ensure that the floppy disk drive is not working, and then press the eject button on the drive.
Using the Hard Disk Drive Your computer comes with a hard disk drive as drive C. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it. It is where your operating system and application software programs are stored. Your hard disk drive is a 2.5-inch IDE (Integrated Drive Electronics) hard disk drive.
Using the DVD Drive Your computer comes with a DVD drive, usually configured as drive D. The drive uses removable 5.25-inch silver discs, which look like standard music CDs. It is an ideal medium to use for distributing multimedia because of the huge amount of data that a disc can store. Depending on the model, your drive is one of the following: DVD drive can read the following discs: CDs, CD-R, CD-RW, DVD (Digital Versatile Disc), DVD-R, DVD+R, DVD-RW and DVD+RW discs.
NOTE: For DVD and Combo drives only. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Using the Video Features The video subsystem of your computer features: 14.1/15-inch TFT (Thin-Film Transistor) color LCD display with SXGA+ (Super Extended Graphics Array Plus) resolution. Up to 1400×1050 resolution on an external monitor Simultaneous display on LCD and external monitor, which is useful when you have a presentation as you can control the screen from your computer and face the audience at the same time.
Configuring the Display Modes NOTE: To take advantage of the enhanced video capabilities, the video driver supplied with your computer must be installed. When using CRT only, the resolution would depend on the supported resolution by the CRT. Your computer has been set to a default resolution and number of colors before shipment. You can view and change display settings through your operating system. See your operating system documentation or online help for specific information.
Using the Audio Features NOTES: To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed. If you experience interference while recording, try lowering the microphone recording volume.
Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Microphone Connector ( ) can be connected to an external microphone for recording voice or sound. Audio Output Connector ( ) can be connected to the line-in connector of powered speakers with built-in amplifiers, headphones, or earphone set. NOTE: When using external speakers/headphones or microphone, you cannot use the internal one.
Using the Communication Features Using the Modem NOTE: To take advantage of the modem feature, the modem driver supplied with your computer must be installed. The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line.
Using the LAN NOTE: To take advantage of the LAN feature, the LAN driver supplied with your computer must be installed. The internal 10/100Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 100 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub.
Using the Wireless LAN (Option) Depending on your model, an internal Mini PCI wireless LAN (WLAN) card may have been pre-installed by your computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless environment. The WLAN features include: IEEE 802.11b/a/g standard compliance 2.
Turning Off/On the WLAN Radio NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety. Remember to turn off wireless LAN radio when using your computer in the airplane. Your computer has a built-in Fn+F1 WLAN hot key to switch the WLAN radio on/off (see “Hot Keys” in chapter 2). Upon booting-up your computer, the WLAN radio is off.
CHAPTER 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer.
Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time. Charging the Battery Pack NOTES: Charging will not start if the battery’s temperature is below 0 °C (32 °F) or above 45 °C (113 °F).
Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. 1. Make sure that the computer power is turned off. Connect the AC adapter to fully charge the battery pack. 2. After the battery pack is fully charged, turn on the computer.
Replacing the Battery Pack CAUTION: There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturer’s optional battery packs. Discard used batteries according to the dealer’s instructions. Do not attempt to disassemble the battery pack. If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup.
Battery Low Signals and Actions Battery Low occurs when the battery has approximately 10 % (Windows default setting) of its charge remaining. The computer gives warning beeps or messages and the Battery Charge Indicator ( ) blinks red to alert you to take actions. NOTE: You can set up your threshold and signals of Battery Low under Windows. Immediately save your data upon Battery Low. The remaining operating time depends on how you are using the computer.
Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows XP, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows’ power management works in this way: What... When...
Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the system can be turned off. When you use the hibernation feature, you do not have to close the applications. The computer stores the state of your computer to a file on the hard disk and then shut down.
Power-Saving Tips In addition to your computer’s automatic power management, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. If you work with an application that uses a PC card, exit the application when you finish using it. If you have a PC card installed, remove it when not in use. Some PC cards drain power even while they are inactive.
CHAPTER 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2. Plug the monitor’s D-type signal connector to the computer’s VGA port. 3. Plug one end of the monitor’s power cord into the power socket on the monitor and the other end to an electrical outlet. 4.
Connecting a TV For entertainment, conferences, or presentations, you can connect a TV to your computer. Follow this procedure to connect a TV: 1. Make sure that the computer is not turned on. 2. You need a video cable for connection. Plug one connector of the video cable to the computer’s S-video connector, then the other end of the cable into the video input connector of the TV. 3. Turn on the power of the TV and switch to the video mode. 4.
Connecting a USB Device Your computer has four USB ports that supports transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such as digital camera, scanner, printer, modem, and mouse. USB is specified to be an industry standard extension to the PC architecture. It supports “Plug-and-Play” technology so you can install and remove USB devices without turning off the computer.
Using PC Cards Your computer has a PC card slot. PC cards are credit card-sized peripheral products based on the standards developed by PCMCIA (Personal Computer Memory Card International Association). PCMCIA is a non-profit association for promoting the interchangeability among mobile computers where ruggedness, low power, and small size are critical.
2. Slide the PC card, with its label facing up, into the slot until the eject button pops out. Eject Button 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card: 1. Double-click on the Safely Remove Hardware icon found on the Windows XP taskbar and the Safely Remove Hardware window appears on screen. 2.
Internal Components Upgrade You can upgrade your computer by changing the CPU or adding memory. However, to avoid damage during the installation procedure, please ask your dealer for help. Do not install an internal component by yourself.
CHAPTER 5 Using BIOS Setup System Configuration Utility (SCU) is a program for configuring the BIOS (Basic Input/Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. This chapter tells you how to use the BIOS Setup.
When and How to Use BIOS Setup When to Use You need to run SCU when: You see an error message on the screen requesting you to run SCU. You want to restore the factory default settings. You want to modify some specific settings according to the hardware. You want to modify some specific settings to optimize system performance. Starting BIOS Setup NOTES: The SCU screens shown in this chapter are for your reference only. The actual items or settings on your computer may differ.
The SCU screen can be divided into four areas: On the top line is the menu bar containing the titles of the available menus. Each menu title brings a specific menu. The center left column of the menu contains information regarding the current settings of the system. If you open a pull-down menu and select an item that provides multiple options, the left column will display a submenu where you can make further selections. The right column of the menu contains details of the CPU and system memory.
Moving Around and Making Selections Keyboard information can be found at the bottom of the screen. A brief description of keyboard usage is listed next: Key 5-4 Function ←,→ Selects a menu title. ↑,↓ 1) Selects an item or option. 2) Brings up/down the value. Enter 1) Brings up the sub-menu when an item with the arrow sign is selected. 2) Opens or closes the option window when an item is selected. Tab Jumps from one item to another. Esc 1) Exits SCU.
Main Menu The main menu contains the basic configuration settings of the system. Date and Time sets the system date and time. Internal NumLock sets if you can enter a number when Num Lock is turned off. When this item is enabled, you can press and hold Fn, and then press a letter key to enter a number even if Num Lock is turned off. When this item is disabled, you cannot enter a number with the above method. A check mark ( ) indicates enabled while underline (_) indicates disabled.
Advanced Menu The Advanced menu contains the I/O (Input/Output) configuration settings of the system. Shared Video Memory sets the shared memory size of the video controller. The options are 8M, 16M, and 32M. The default setting is 32M. NOTE: This item is for Legacy VGA and SVGA mode only. When under Windows mode, the shared video memory is allocated directly by the VGA driver based on the size of your system memory.
Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Set Password allows you to set the password for your system. When typing the password, first make sure that Num Lock is off, then type your password in the entry fields and press Enter. Confirm your password by typing it again and pressing Enter. If the Enable Password to Power-on sub-item is enabled, the set password is always required to boot the computer.
Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Boot Sequence sets the first, second, third, and fourth booting device. The system will try to boot from the first device but if it is not available, will try the next boot device. If you set the first boot device to LAN Boot, the system will boot from the LAN server first. The options are Hard Disk Drive, CD-ROM Drive, Floppy Disk Drive, and LAN Boot.
Exit Menu The Exit menu displays ways of exiting SCU. After finished with your settings, you must save and exit so that the new settings can take effect. Save Changes and Exit saves the changes you have made and exits SCU. After finished with your settings, you must save and exit so that the new settings can take effect. Discard Changes and Exit exits SCU without saving the changes you have made. Get Default Values loads factory default values for all the items.
CHAPTER 6 Installing Software Drivers To take full advantage of the unique features of your computer, some operating systems require custom software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the CD supplied with your computer. This chapter describes how to install the drivers.
How to Use the Driver CD NOTES: The drivers may have been updated after this manual was published. For driver’s upgrade, please contact your dealer. This CD supports Windows XP only. You are recommended to install Windows XP Service Pack 1. The available items may differ according to your computer model. Please do not remove the driver CD when installing the driver. An autorun program is provided on the driver CD to help you easily install the drivers.
To install the intended driver, just click on the corresponding icon on the left side and installation will start. The icons and drivers are described next: Icon Name Description Chipset driver Ensures the full function of the following drivers. Install this driver before installing the other device drivers. Video driver Installs the video driver that allows you to select high-resolution displays with richer colors.
Icon Name Description On Screen Display (OSD) utility Installs the OSD utility that provides a graphic display to indicate the current status of certain operations. This OSD utility is an option for you. You can decide whether you would like to have this utility installed. (See “Using the OSD Utility” section for details). Browse CD Browses the contents of this CD. Using the OSD Utility NOTES: This OSD utility is an option for you. You can decide whether you would like to have this utility installed.
Changing the OSD Color You can change the colors of the individual OSD elements. Right-click on the OSD utility icon on Windows system tray. Click on Color and the following window appears. To change the color of an element such as text, graphic, and background, click on the corresponding color square and the next window appears where you can specify the color. Windows would retain the settings the next time you restart the system.
Exiting and Reactivating the OSD Utility To exit the OSD utility, right-click on the OSD utility icon Windows system tray and click on “Exit.” on To reactivate the OSD utility: Double-click on the file OSD.EXE located on c:/Program Files/OSD/ or Restart the system.
CHAPTER 7 Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer.
Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use. If the password is set, the prompt requesting for the password appears on the screen whenever the computer is turned on. The password is set via the BIOS Setup program. See “Security Menu” in Chapter 5 for instructions.
Using an Anti-Virus Strategy New viruses are always being developed nowadays and they are attacking computers even more easily with emails so commonly used worldwide. The security feature of the BIOS protects the boot sector of the hard disk. To enable the function, see “Security Menu” in Chapter 5 for instructions. You can also install a virus-detecting program to monitor potential viruses that could damage your files.
Taking Care of the Computer Location Guidelines Use the computer where the temperature is between 10 °C (50 °F) and 35 °C (95 °F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Do not cover or block any ventilation openings on the computer. For example, do not place the computer on a bed, sofa, rug, or other similar surface. Otherwise, overheating may occur that results in damage to the computer.
Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display. Dust or grease on the touchpad can affect its sensitivity. Clean the pad by using adhesive tape to remove the dust and grease on its surface. Battery Pack Guidelines Recharge the battery pack when it is nearly discharged.
When Traveling Before traveling with your computer, make a backup of your hard disk data into floppy disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed. Do not leave objects in between the keyboard and closed display. Disconnect the AC adapter from the computer and take it with you.
CHAPTER 8 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer. If an external device has a problem, make sure that the cable connections are correct and secure. Make sure that the configuration information is properly set in the BIOS Setup program.
Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery Problems P. 8-4 DVD Drive Problems P. 8-4 Display Problems P. 8-5 Floppy Disk Drive Problems P. 8-7 Hardware Device Problems P. 8-8 Hard Disk Drive Problems P. 8-8 Keyboard, Touchpad and Mouse Problems P. 8-8 LAN Problems P. 8-9 WLAN Problems P. 8-9 Modem Problems P. 8-11 PC Card Problems P. 8-11 Power Management Problems (for Windows) P. 8-12 Software Problems P.
Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly. Make sure that the battery terminals are clean. The operating time of a fully charged battery becomes shorter.
Make sure that the computer supports the CD/DVD or the files contained. You cannot eject a CD/DVD. The CD/DVD is not properly seated in the drive. Manually release the CD/DVD following the method described next: 1. Turn off the system. 2. Insert a small rod, such as a straightened paperclip, into the drive’s manual eject hole and push firmly to release the tray. 3. Pull the tray out until fully extended, and then remove the CD/DVD. Display Problems Nothing appears on the screen.
The characters on the screen are dim. Adjust the brightness and/or contrast. Bad dots appear on the display at all times. A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD defect. Term definition: Bright dots When the LCD screen is lighted, dots appear bright at a dark area. Red/green/blue bright dots also count. Dark dots When the LCD screen is lighted, dots appear black at bright areas.
Switch the display to the TV by changing the settings in Display Properties in Windows. Simultaneous display/multi-display does not work. Make sure that you turn on the external monitor before turning on the computer. Press Fn+F5 to toggle through the display options or change the settings in Display Properties in Windows. Floppy Disk Drive Problems The disk drive does not work. Make sure that the disk drive is properly connected. The Floppy Disk Drive In-use Indicator stays on.
Hardware Device Problems The computer does not recognize a newly installed device. The device may not be correctly configured in the SCU program. Run the SCU program to identify the new type. Make sure if any device driver needs to be installed. (Refer to the documentation that came with the device.) Make sure if the device needs any jumper or switch settings. (Refer to the documentation that came with the device.) Check the cables or power cords for correct connections.
The numeric keypad is disabled. Make sure that the Num Lock is switched on. (Check if the Num Lock Indicator lights green or not.) The external keyboard does not work. Make sure that the keyboard cable is properly connected. The USB mouse does not work. Make sure that the mouse cable is properly connected. The touchpad does not work, or the pointer is difficult to control with the touchpad. Make sure that the touchpad driver (if any) is correctly installed. Make sure that the touchpad is clean.
Transmission quality is poor. Your computer may be in an out-of-range situation. Move your computer closer to the Access Point or another WLAN device it is associated with. Check if there is high interference around the environment and solve the problem as described next. Radio interference exists. Move your computer away from the device causing the radio interference such as microwave oven and large metal objects.
Use the Web Manager/Telnet of the Access Point to check whether it is connected to the network. Reconfigure and reset the Access Point. I cannot access the network. Make sure that the necessary driver(s) is correctly installed. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. You have moved out of range of the network. Turn off power management. Modem Problems The modem does not work. Make sure that the modem driver is correctly installed.
Power Management Problems (for Windows) The computer does not enter Standby or Hibernation mode automatically. If you have a connection to another computer, the computer does not enter Standby or Hibernation mode if the connection is actively in use. Make sure that the Standby or Hibernation time-out is enabled. The computer does not enter Standby or Hibernation mode immediately. If the computer is performing an operation, it normally waits for the operation to finish.
If you are sure the operation has stop, reset the computer. (See “Resetting the Computer” later in this chapter.) Sound Problems No sound is produced. Make sure that the volume control is not set too low. Make sure that the audio driver is correctly installed. Make sure that the computer is not in Standby mode. If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced. Make sure that the volume control is not set too high or too low.
Startup Problems When you turn on the computer, it does not respond and the Power Indicator does not light green. If you are using an external AC power, make sure that the AC adapter is correctly and securely connected. If so, make sure that the electrical outlet works properly. If you are using the battery power, make sure that the battery is not discharged. When you turn on the computer, it stops after POST. Restart your computer.
Other Problems The date/time is incorrect. Correct the date and time via the operating system or SCU program. After you have performed everything as described above and still have the incorrect date and time every time you turn on the computer, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery.
Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the system operation seems to hang up, first wait. It is possible that the system is processing data. Periodically check the hard disk drive in-use indicator, if it flashes irregularly, the program may be accessing data and preventing you from using the keyboard.
APPENDIX A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications CPU Intel Celeron-M processor; 1.2~2.
Parts PC card Specifications Type II × 1, CardBus support I/O ports Four USB ports (USB 2.0 support) Modem Built-in 56 Kbps V.90 MDC internal fax modem LAN Built-in 10/100Base-T LAN Wireless LAN One Mini PCI slot and one antenna reserved for wireless LAN card, compliant with 802.
APPENDIX B Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.
On the Use of the System Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur.
ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
About the Modem Caution Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch non-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Avoid using the telephone function (other than a cordless type) during an electrical storm.
On the Use of RF Device NOTE: The information in this section applies to models with the wireless LAN module. USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons. High-gain, wall-mount, or mast-mount antennas are designed to be professionally installed and should be located at a minimum distance of 30 cm (12 inches) or more from the body of all persons.
maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. European Union CE Marking and Compliance Notices Statements of Compliance English This product follows the provisions of the European Directive 1999/5/EC.
Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC. Portuguese Este produto cumpre com as normas da Diretiva Européia 1999/5/EC. Spanish Este producto cumple con las normas del Directivo Europeo 1999/5/EC. Swedish Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC. Local Restrictions of 802.11b Radio Usage CAUTION: Due to the fact that the frequencies used by 802.
In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading “How to Turn Off the Wireless LAN.” France Departments in Which the Wireless LAN Module Can Be Used (Indoors Only) The wireless LAN module can currently be used indoors only in the following 38 departments of mainland France.
Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card. It is not necessary to disable the card to meet the regulatory requirements. While operating the computer in those French departments that do not allow use of the wireless LAN equipment, the user of the equipment must turn off the wireless LAN radio in order to comply with local regulations (see chapter 2 for more information).
Index Ａ AC, 3-2 AC adapter, 3-2, A-2 Cautions, B-4 Connecting, 1-2 AC power Connecting, 1-2 ACPI, 3-7 Adobe Acrobat Reader, 6-4 Alt key, 2-4 Anti-Virus, 7-3 Audio driver, 6-3 Audio output connector, 1-9, 2-22 Audio subsystem, A-2 Connecting external audio devices, 2-22 Driver installation, 6-3 Feature, 2-21 Troubleshooting, 8-12 Ｂ Backspace key, 2-4 Battery low, 3-6 Battery pack, 1-8, 3-3, A-2 Battery low, 3-6 Charging, 3-3 Checking the battery level, 3-4 Initializing, 3-4 Replacing, 3-4 Taking care, 7-5 T
Ctrl key, 2-4 Cursor, 2-5 Cursor-control key, 2-5 Ｄ Partition table, 5-8 Troubleshooting, 8-7 Hibernation, 2-3, 3-7, 3-8 Troubleshooting, 8-11 Hot keys, 2-8 Humidity, A-3 Date, 5-5, 8-14 DC, 3-2 Dimension of the computer, A-2 Display mode, 2-19 Double-click, 2-11 Drag and drop, 2-11 Drive A, 2-13 Drive C, 2-16 Drive D, 2-17 Driver installation, 6-1 Driver O/S support, 6-2 DVD-ROM drive.
Monitor Connecting, 4-2 Mouse Troubleshooting, 8-7 Restarting, 8-15 RJ-11, 1-7, 2-23 RJ-45, 1-7, 2-24 ROM BIOS, A-1 Ｎ Ｓ Network. See LAN Num Lock, 2-4 Indicator, 1-12 Numeric key, 2-6 Saving power, 3-9 Screen.
Troubleshooting, 8-1 Battery problem, 8-3 CD drive problem, 8-3 Display problem, 8-4 Floppy disk drive problem, 8-6 Hard disk drive problem, 8-7 Hardware problem, 8-7 Keyboard problem, 8-7 LAN problem, 8-8 Modem problem, 8-10 Mouse problem, 8-7 Other problems, 8-14 PC card problem, 8-10 Power Management problem, 8-11 Software problem, 8-11 Sound problem, 8-12 Startup problem, 8-13 Touchpad problem, 8-7 WLAN problem, 8-8 Turning off, 1-5, 2-2 Turning on, 1-4 TV Connecting, 4-3 Typewriter key, 2-4 Ｕ Upgradin
