Operation Manual

NOTE: For DVD and Combo drives only.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Inserting and Removing a CD/DVD
Follow this procedure to insert or remove a CD/DVD:
1. Turn on the computer.
2. Press the eject button and the DVD tray will slide out partially.
Gently pull on it until it is fully extended.
3. To insert a CD/DVD, place down the CD/DVD in the tray with its
label facing up. Slightly press the center of the CD/DVD until it
clicks into place.
Eject Button
In-use Indicator
To remove a CD/DVD, hold the CD/DVD by its outer edge and lift it
up from the tray.
4. Gently push the tray back into the drive.
NOTES: In the unlikely event that you are unable to release the DVD tray by pressing
the eject button, you can manually release the CD/DVD. (See “DVD Drive Problems” in
Chapter 8.)
Operating Your Computer 2-17