Operation Manual

Connecting a TV
For entertainment, conferences, or presentations, you can connect a TV to
your computer.
Follow this procedure to connect a TV:
1. Make sure that the computer is not turned on.
2. You need a video cable for connection. Plug one connector of the
video cable to the computer’s S-video connector, then the other end
of the cable into the video input connector of the TV.
3. Turn on the power of the TV and switch to the video mode.
4. Turn on the power of the computer and switch the display to TV by
changing the display through the settings in Display Properties in
Windows.
CAUTION:
 Do not set the display to both LCD and TV. This may cause unstable display on the
LCD.
 Do not disconnect the TV while the computer is in Standby or Hibernation mode. If
the TV is not connected when the computer resumes, the LCD might not display
properly.
NOTE: Make sure that the VGA driver is installed correctly.
Expanding Your Computer 4-3