Operation Manual

Security Menu
The Security menu contains the security settings, which safeguard your
system against unauthorized use.
Set Password allows you to set the password for your system. When
typing the password, first make sure that
Num Lock is off, then type your
password in the entry fields and press
Enter. Confirm your password by
typing it again and pressing
Enter. If the Enable Password to Power-on
sub-item is enabled, the set password is always required to boot the
computer.
Hard Disk Boot Sector sets if a warning message will appear when the
hard disk boot sector (partition table) has been changed. A checkmark ()
indicates enabled, while an underline (_) indicates disabled. The default
setting is disabled.
CAUTION: Set this item to disabled before installing an operating system, running
Fdisk or Format program. Otherwise, the intended action will fail.
Using BIOS Setup 5-7