Operation Manual

INSTRUCTION MANUAL 20
Monitor installation
1. Drill 8 holes as shown at left. Using an 8 mm drill
appropriate for the wall material, drill each hole to a
depth of 80 mm or more.
2. Clean out each drilled hole.
3. Insert an anchor supplied with the wall mounting
bracket into each hole.
4. Mount the wall mounting bracket on the wall using
the 8 screws supplied.
WALL DRILL( 8mm)
ANCHOR
WALL MOUNTING BRACKET SCREW
1. As shown at left, carefully place the monitor screen
side down on a soft surface to protect the monitor and
screen from damage.
2. Insert the monitor brackets on the monitor as shown
at left. Install the 4 bolts securely in the back of the
monitor and tighten them. Ensure that the bracket
hooks are at the top side of the monitor. (for 42" PDP)