Operation Manual

INSTRUCTION MANUAL 29
Watching videos (Scart type)
• On connecting external devices to the plasma monitor, always ensure that the colours of the connections match
(e.g. video-yellow, audio (L) - white, audio (R) - red).
If you have only a mono video recorder, connect the audio cable of the video recorder to the AUDIO (L/MONO)
input of the plasma screen.
The image quality is considerably better compared to a normal video recorder connected to video input if you
connect an S-VIDEO video recorder to the S-VIDEO input socket.
Avoid fixed images over a long period. Such burnt-in images come mostly from video films in the 4:3 image format
or if programme information is being shown.
Video (main)
Audio (R)
Audio (L)
S-Video
<To prevent image interference, leave sufficient space (more than 3 m) between the video recorder and the TV
set.>
Watching videos through the video recorder (if the interface card is
installed)
3. Press the TV/Video button on the remote control and select the video source. (For S-Video connection,
also select S Video as source).
4. Place a video cassette in the video recorder and press the PLAY key on the video recorder.
Warning
• No Signal
The message "No signal" will disappear from the screen after about 5 minutes then the TV goes in the stand-by mode (dark).
This is not a malfunction.