Operation Manual

INSTRUCTION MANUAL 3
Important safety instructions
This symbol is intended to alert the user to the
presence of un-isolated "dangerous voltage" in the
appliance high enough to cause electric shock.
This symbol is intended to alert the user to the
presence of important operating and maintenance
instructions in the manual accompanying the
appliance.
CAUTION
- DO NOT EXPOSE THE APPLIANCE TO RAIN OR
MOISTURE IN ORDER TO PREVENT THE HAZARD OF
FIRE OR ELECTRICAL SHOCK.
- SHOCK HAZARD – DO NOT OPEN!
CAUTION
These servicing instructions are intended only for use by qualified customer service personnel. To keep the risk of electric
shock to a minimum, have repairs -- if not mentioned in this manual -- carried out exclusively by qualified professionals.
WARNING
- Protect the appliance from splashing water, and it must not be dipped in water; under no circumstances should objects filled
with water or other liquids, such as vases, be placed on the appliance.
- This is a Class B product. In domestic environment, this product may cause radio interference, which the user must take
adequate measures to suppress it.
- In order to reduce the risk of fire or electrical shock, do not subject the unit to rain or humidity.
FCC DECLARATION
This device has been tested and found to comply with the limits for a class B device, pursuant to Part 15 of the FCC
specifications. These limits are designed to provide protection from harmful interference in home environment as well as in a
commercial, industrial or business environment. This device generates, uses and under certain circumstances radiates high
frequency energy and can cause interference in radio and TV reception if not properly installed and operated as well as in
isolated cases. The manufacturer does not provide any guarantee about interference from any particular system or device in
any way. Should this device cause harmful interference in radio or TV reception, which can be established by switching the
device off and on again, the user can take one of the following measures to correct this interference:
- Reorient or relocate the antenna.
- Increase the separation between the device and the receiver.
- Connect the device to a plug point on a circuit different from that to which the receiver is connected.
- Seek advice from your dealer or from an experienced radio/ TV technician.
The manufacturer refuses to accept liability for changes made to this device without prior written approval on the part of the
manufacturer.
Use only grounded, shielded signal cables for connecting peripheral devices.
Always handle the monitor very carefully. To reduce the risk of fire, electrical shock and
other injuries, always bear these safety precautions in mind when installing, using and
maintaining your appliance.
Read all safety and operating
instructions before operating the
monitor.
Preserve the safety and operating
instructions properly for later reference.
Heed all warnings on the monitor and in
the operating instructions.