Operation Manual

INSTRUCTION MANUAL 30
Watching DVDs (interface)
Connecting DVD player (if the interface card is installed)
Connect video inputs of the DVD player to Y, PB, PR of the COMPONENT (480i) (DVD-INPUT) connection and
audio inputs to the audio sockets of the AV INPUT.
RCA type
Scart type
Audio (R)
Audio (L)
DVD Component
DVI INPUT is optional
Operating DVD player (if the interface card is installed)
Command input
3. Switch on the DVD player.
4. Press the INPUT button on the remote control of the PDP
and select Component 1 or Component 2 as the input
source.
1. Component input sockets
You will get a better image quality if you connect the
DVD player to the component input socket as shown.
Supported signals for component parts
Component 1 Component 2
50/60 Hz 0 0
480p/60 Hz 0 0
576i/50 Hz 0 0
576p/50 Hz 0 0
720p/60 Hz 0 0
1080i/50 Hz 0 0
1080i/60 Hz 0 0
Component
terminals in the TV
set
Video input sockets
of the DVD player
Notes:
• The normal DVD source is based on 480i, which should be through normal YPbPr of the component signal.
• Component, PC, DVI connections can show only 1 signal from among them. If one of them is displayed, no other ports are available.