Operation Manual

INSTRUCTION MANUAL 42
OTHER SETTINGS (TV, VIDEO and PC)
Image scaling, OSD display.
SETTING ID
If you wish to control more than 2 PDPs through a PC,
you can assign an ID between 1 and 99 to each PDP
by cabling with an RS232C cable.
ADVANCED
You can set the burning-in protection here.
BURN PROTECT
The picture burn protection prevents a single picture
from being displayed over a long period. To avoid
displaying a static image over a long period, the image
moves horizontally by 2-3 pixels over the screen every
2 minutes.
This movement is repeated till the PDP is switched off.
(Standard is On.)
SCART DVD
If you want to watch Pay TV through a set-top box
(Decoder), select “SCART DVD Not Used”.
(* This mode supports only CVBS for input or output.)
NATIVE MODE
If you use the PDP as PC monitor, the Native Mode is
always shown in the resolution 852 x 480.
If you deactivate the NATIVE MODE, the PDP is
displayed with the resolution 630 x 480, except if the
resolution is 848 x 480.
Note:
• If the Native Mode function is activated, the resolution 640x480 changes to 850x480.