26 LCD DISPLAY Operating Instructions
1 Dear customer Thank you for selecting the high-definition TFT LCD Color TV. Before operating the set, please read this Operating Instructions carefully. In order to use and maintain the set better, please follow its operating instructions. Thank you for your cooperation. Table of Contents I. Main features and functions ------------------------------------------------------------------------ 2 2 III.
2 I. Main features and functions No radiation, low flicker and low power consumption. It is an environment-protective and power-saving product. Light weight, small cubage, dual-purpose usage of wall-mounting and desk-top. Beautiful appearance, innovative type, simple operation and convenient usage. With dual-function of TV receiver and computer monitor. With multiway inputs: Video, S-Video, Scart (AV/RGB), DTV(YPbPr), Component(YCbCr) and analog RGB(PC) . With NICAM stereo function.
3 III. Specifications Screen Size 26 inch (diagonal) Display Resolution 1280 Aspect Ratio of Screen 15:9 Max. Visual Angle Horizontal angle 768 x + =85 (CR 5) Vertical angle Y+ x - =85 =85 (CR 5) Y - =85 Power Supply 160~240V AC 50/60Hz TV Received Signal 48.25MHz-168.25MHz Broadcast Signal System PAL B/G,I,D/K, SECAM L, B/G, D/K DTV input/Component input YPbPr (480p,576p,720p,1080i)/YCbCr(480i,576i) (HDTV support 175.25MHz-463.25MHz 471.25MHz-855.
4 V.
5 Rear view Power Switch Component Video Input/HD Video Input Y PC IN Pb/Cb Antenna Input Pr/Cr SCART S-VIDEO PC Input R L AUDIO OUT R AC IN AUDIO VIDEO 2 R L L Video Input1 Audio Input S-Video Input AIR/CABLE PC AUDIO AUDIO VIDEO 1 Video Input2 SCART Input/Output (Decoder) Power Input PC Input Audio Out Audio Input 2
6 VI. Mount up the base Mount up the base (1)Put the TV on a table face down. (2)Take out the base and fasten it to the TV with 4 M5 20 screws(black). The Screw holes are as show on fig.1. The TV and the connecting face of the base can be rotated together. fig. 1 (3)Stand the TV with the base on the table. It can be rotated clockwise and counter clockwise up to 15 o . (4)When the red line in the indication window points at the central dot, it means that the screen is just in forward direction. fig.
7 VII. Connection for external video and audio equipment DVD& SET-TOP BOX POWER AMPLIFIER AUDIO OUT R L AUDIO IN R L L AUDIO OUT R OUT Y Cb r AUDIO VIDEO 2 R L AIR/CABLE DVD&VCD S-VIDEO OUT VIDEO OUT L R AUDIO OUT L AUDIO OUT R DVD& SET-TOP BOX L R AUDIO OUT S-VIDEO OUT PC L R AUDIO OUT OUT Y Pb Pr VIDEO OUT L AUDIO OUT R Use proper signal Cables to connect outputs of signal sources and inputs of the unit correspondingly. Make sure of good contact.
8 VIII. Preparation for switch on 1.Install the battery for the remote controller a. Press the cover of the battery compartment on the back of the remote controller and remove it. b. Insert 2 AAA batteries, make sure the polarity (+) or (-) of batteries conforms to the polarity marks in the battery compartment. c. Slide the cover of the battery compartment to the original place. 2.
9 IX. Basic operation 1. Power on / off operation. Insert one plug of the AC Power Cord in the jack of Power Input of the unit. Insert the other plug of AC Power Cord to the suitable AC power socket with grounding. Then switch on the Power switch of this unit. The red light of Power Indicator will be bright and the unit enter upon the stand-by status. Press button on the remote controller or on the panel, the system will begin to work.
10 press V+ or V- button to adjust program number. Press P+ or P- button to select BAND item. Press V+ or V- button to select V/UHF or CABLE. Press P+ or P- button to select CHANNEL item. Press V+, V- or digital button to select channel number. If the program is desirable, press INSERT or REPLACE button on the remote controller and the program will be stored under the current program number. Press EXIT for exiting.
11 6 How to use the function of teletext. Start-up Press TEXT button on the remote controller and the image (f) will appear on the screen. It means that the NO DATA function of teletext starts. Press TEXT button on the remote controller repeatedly and the image of teletext will change accordingly. Teletext TV 100 Page turning Press the P- or red button to turn to the previous page. Press the P+or green button to turn to the next page.
12 EQUALIZER 120Hz 500Hz 1.5KHz 5KHz 10KHz 0 0 0 0 0 SPATIAL UP DOWN 50 LEFT RIGHT EXIT 9 10 SOUND MENU UP DOWN EXIT 20 VOLUME BALANCE SOUND MODE 0 NORMAL Off AVC VOLUME change the sound volume BALANCE change the balance of the left sound track and right sound track ( 0 is the balance point) SOUND MODE: Normal Cinema News Flat User Normal ( Pressing the SOUND shortcut button on the remote controller has the same function.
13 XIII. How to set time, sleep time and wake up time (1) Sleep time setting TIME MENU UP DOWN Off SLEEP WAKE UP Press MENU TIME Press MENU EXIT Press MENU button. Press P+ or P- button to select TIME menu, the image (p) will appear on the screen, then press MENU button to confirm. Press P+ or P- button to select the SLEEP item and press MENU to confirm. Then press V+ or V- button to select time.
14 XV Adjustment of image display under Analog RGB(PC)/DTV(YPbPr) input status 1 The adjustment of brightness and contrast PICTURE MENU UP DOWN EXIT BRIGHTNESS 50 50 CONTRAST TEMPERATURE Normal Press MENU POSITION Press MENU button. Press P+ or P- button to select PICTURE menu, the menu (s) will appear on the screen, then press MENU button to confirm. Press P+ or P- button to select item and press MENU to confirm, then press V+or V- button to change the value of the item.
15 XVI. The PIP function under Analog RGB(PC)/DTV(YPbPr) input status PIP MENU PIP ON/OFF 11 UP DOWN EXIT PIP off PIP SOURCE TV AUDIO SOURCE PIP PIP POSITION Press MENU button. Press P+ or P- button to select PIP menu, the image (w) will appear on the screen, then press MENU button to confirm. Press P+or P- button to select the item. Select PIP ON/OFF item, then press V+ or V- button to select PIP ON. Press EXIT button to exit the menu.
16 Check if the power cable is connected . Check if the signal source has normal output under the current play status. Check the brightness and contrast of the image and check if the volume setting is correct. No image and sound If it is under stand-by status. Check if the sound has been input correctly. Image is normal, but there is no sound 12 Check the volume setting. Check the MUTE setting. Check the color setting.
SPW2.025.
