Operation Manual

50
SETUP
▶ Time ▶ On Timer
This PDP/LCD can be set to turn on automatically at specific time that you chose.
Before using timer, you must set the PDP/LCD’s Time as described previously.
1. Press MENU button to display the
main OSD menu.
2. Select the TIME main menu with
CH+/CH- button on the remote control.
3. Press ENTER to enter the sub menu.
4. Selet On Timer by pressing VOL+
button.
5. Move the cursor by pressing VOL-,
VOL+ button and adjust on time by
CH+ and CH- button.
(Notice: You can’t see the real time on
this picture since this picture isn’t a real operating mode but a design mode. In a real mode, you can
see the real clock time.)