Safety data sheet

ManualsBrandsGERMAN REPRAP Manuals3D PrintingFilament BendLay plastic 3 mm Ecru 750 g

MSDS Safety Data Sheet according to Reg. (EC) N. 453/2010

BendLay

belling (CLP)

Hazard statements: not applicable

Safety precautions: not applicable

Labelling (67/548/EEC or 1999/45/EC)

R phrase(s):not applicable

S phrase(s):not applicable

2.3 Other hazards

Dust: Can cause skin, eye and respiratory tract irritation.

Fine dust: explosive

The melted product can cause severe burns.Swallowing may cause gastrointestinal irritation and pain of

guts.

Section 3. Composition / information on ingredients

3.1 Mixtures

Chemical characterization: Polystyrene mixture contains:

S No. 9003-55-8: Styrene-butadiene-copolymer contains:

CAS No. 9003-53-6: Polystyrene

Section 4. First aid measures

4.1 Description of first aid measures

After inhalation: Provide fresh air. Put victim at rest and keep warm. seek medical attention

In case of skin contact: The melted product can cause severe burns.Do not remove the product

from the skin without medical assistance.After contact with molten product, cool skin area rapidly with

cold water. Consult physician.

After eye contact: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact

lenses, if present and easy to do. Continue rinsing.Consult an eye specialist in the event of irritation.

After swallowing: Rinse mouth with water. Drink one or two glasses of water.Never give an

unconscious person anything through the mouth. seek medical attention

4.2 Most important symptoms and effects, both acute and delayed

Dust: Skin irritation, eye irritations and redness

4.3 Indication of any immediate medical attention and special treatment needed

Treat symptomatically. (Decontamination, vital functions)

MSDS Safety Data Sheet according to Reg. (EC) N. 453/2010 BendLay 30. March 2015 page 1/5

Section 1 .Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

BendLay

1.2 Company Identification

Orbi-Tech GmbH, Motlkestrasse 25, 42799 Leichlingen, Germany

Section 2. Hazards Identification

2.1 Classification of the substance or mixture

Classification according to EC regulation 1272/2008 (CLP) or Directive 67/548/EEC or 1999/45/EC

This mixture is classified as not hazardous.

2.2 Label elements

Summary of content (5 pages)

PAGE 1
MSDS Safety Data Sheet according to Reg. (EC) N. 453/2010 BendLay Section 1 .Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier BendLay 1.2 Company Identification Orbi-Tech GmbH, Motlkestrasse 25, 42799 Leichlingen, Germany Section 2. Hazards Identification 2.1 Classification of the substance or mixture Classification according to EC regulation 1272/2008 (CLP) or Directive 67/548/EEC or 1999/45/EC This mixture is classified as not hazardous. 2.
PAGE 2
Section 5. Firefighting measures 5.1 Extinguishing media Suitable extinguishing media: Water fog, foam, extinguishing powder, carbon dioxide (CO2). Extinguishing media which must not be used for safety reasons: Full water jet 5.2 Special hazards arising from the substance or mixture In case of fire may be liberated: smoke, carbon monoxide and carbon dioxide (CO2). In case of dust (Fine dust): danger of dust explosion 5.
PAGE 3
Hand protection: Protective gloves according to EN 374. Glove material: Nitrile rubber - Layer thickness: 0,11 mm. Breakthrough time: >480 min. Observe glove manufacturer's instructions concerning penetrability and breakthrough time. In case of melting: Protective gloves against heat according to EN 407. Observe glove manufacturer's instructions concerning penetrability and breakthrough time. Eye protection: Tightly sealed goggles according to EN 166. Body protection: Wear suitable protective clothing.
PAGE 4
Aspiration hazard: Lack of data. years of experience with this product, no adverse health effects are known. Other information: When handled appropiately, even after long Symptoms Dust: Can cause skin, eye and respiratory tract irritation. The melted product can cause severe burns. Thermal treatment, Processing: Irritating to eyes, respiratory system and skin. In case of ingestion: Swallowing may cause gastrointestinal irritation and pain of guts. Section 12. Ecological information 12.
PAGE 5
14.5 Environmental hazards Marine pollutant No 14.6 Special precautions for user No dangerous good in sense of these transport regulations. 14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code No data available Section 15. Regulatory information 15.1.