Manual

D-21: Cleaning:
Notice:
- The previously shown disassembling is sufficient for a overall cleaning.
- A further disassembling of the rifle should only be made by qualified personnel.
- Do not use a steel brush or any other hard material to clean the barrel.
This could damage the flat surface of the barrel.
Use only a suitable cleaning rod and brushes of the right caliber.
- Do not use thinner to clean the gun.
Procedure:
1. Use the cleaning brush to carefully remove all powder residues and dirt in the barrel and chamber. (Figure 2 page 24)
2. Wipe powder residues and oil from the barrel bore and chamber with cleaning patches. (Figure 2 page 24)
3. Remove dirt from guides of breech and from breech-block.
(Figure 1 page 24).
4. Lightly oil bore of chamber.
5. Insert the cleaning rod into the barrel to remove dirt.
(Figure 3 page 24).
Figure 3
Figure 2
Figure 1
Breech Block
Cleaning rod
Barrel Chamber
page 24