User Manual & Warranty

INSTALLING & REMOVING UV-C BULB
INSTALLING & REMOVING UV-C BULB
1. Remove the Rear Cover of the unit by pushing Lock & Release Button (Fig. 1).
INSTALLING & REMOVING FILTER
Main Unit
UV-C
Bulb
UV-C
Metal
Shield
HEPA
Filter
Rear Cover
with Air
Inlet Grill
Lock & Release
Button
INSTALLING/REMOVING COMBINATION FILTER
1. Turn off and unplug the unit.
E-7
E-6
2. Press the Lock & Release Button and remove the Rear Cover from the unit.
3. Remove the used Combination Filter (Filter B) and dispose of it in the garbage.
4. Insert new Combination Filter into the unit. Consult the arrow on the lter for
correct installation direction.
5. Reattach the Rear Cover of the unit and securely latch into place.
OPERATING INSTRUCTIONS
BEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purier and combination lter (2 parts) from box and bag.
2. Select a rm, level and at location for the air purier.
* For proper air ow, locate the unit at least 1 foot from any wall or furniture.
* Make sure none of the grills are blocked.
3. Plug the power cord into a 120V AC outlet.
IMPORTANT: When moving the air purier, always lift unit by the carrying handle located on back.
1. Turn the air purier ON by rotating POWER KNOB clockwise.
2. Upon turning the air purier ON, the power indicator will be lit and the unit will be in
LOW mode ( ).
3. Rotate the POWER KNOB clockwise further to set the air purier to MEDIUM mode ( ).
4. Continue to rotate the POWER KNOB clockwise to set the air purier to HIGH mode ( ).
5. To activate the UV-C Bulb, press the UV button. Press the button again to turn OFF the
UV-C Bulb.
6. To turn the unit OFF, rotate the POWER KNOB counter-clockwise to OFF mode (
•
).
OPERATING THE AIR PURIFIER:
Air Cleaning System
Improve your indoor air quality with your new Germ Guardian
®
Air Cleaning
System. Multiple levels of cleaning include a combination True HEPA lter
that captures allergens, and Charcoal lter to remove odors. UV-C light
technology enhances germ-killing.
Pre-Filter*
Captures initial dust and allergen particles.
Charcoal Filter*
Contributes to the control and prevention of the growth of bacteria, germs and mold.
True HEPA Filter
Captures 99.99% of dust and allergens.
UV-C Light
UV-C light technology works with lters to enhance the elimination of airborne germs
Titanium Dioxide is activated by the UV-C light to decompose remaining odor molecules
caused by smoking, cooking and pets.
*Pre-Filter and Charcoal Filter are combined into one layer that attaches to the HEPA Filter.
E-8
E-9
FIG. 1
FIG. 2
FIG. 3
2. After removing the Rear Cover from the unit, remove the Combination Filter (Fig. 2).
3. After removing the Combination Filter, use a Philips head screwdriver to remove two (2)
screws and detach the UV-C Metal Shield (Fig. 3).
AIR CLEANING LAYERS
Filter Package includes:
• 1 HEPA Filter
1 Pre-/Charcoal Filter
Filter lasts approximately 6-8 months
depending on use.
Before use, attache one (1)
Pre-/Charcoal lter to the
HEPA lter to create one
complete combination lter.
*Filter parts must
be removed from
plastic bags
before use.
Pre/
Carbon
Filter