Manual

9Original Instructions
water supply.
Wind up electrical cable and high pressure hose – to
avoid damage of cable, plug, high pressure hose and
fittings.
Always empty pump, hose and accessories of water
after use of the machine and prior to storing.
Maintenance and repairs
WARNING!
Always disconnect the electrical plug from the socket
prior to maintenance, cleaning and repair.
Any repair should always be made in Gerni authorized
workshop with original Gerni spare parts.
Do not attempt any maintenance not described in the
instructions.
If the machine refuses to start, stops, pulsates, pres-
sure fluctuates, motor busses, fuse blows or no wa-
ter comes out, check the trouble shooting diagram
in these instructions. In case other problems occur,
please contact your local Gerni distributor.
Recycling the high pressure washer
Make the old machine unusable immediately.
Unplug the machine.
Cut the electric cable.
Do not discard electrical appliances with household
waste. As specified in European Directive 2002/96/EC
on old electrical and electronic appliances, used elec-
trical goods must be collected separately and recycled
ecologically. Contact your local authorities or your near-
est dealer for further information.