Why compromise Classic 100.3 Classic 100.3 S Classic 110.4 Classic 115.3 Classic 120.4 128331922 User Guide Classic 100.3 Classic 100.3 S Classic 110.4 Classic 115.3 Classic 120.
Printed in China Copyright © 2013 Gerni
Contents 1 2 3 4 5 6 7 8 9 10 Introduction ...................................................................................................................................................3 Safety precautions and working techniques .................................................................................................3 Before you start using your high pressure washer........................................................................................7 Operating your high pressure washer ....
insurance association, social security institutions, occupational safety and health authorities or other organizations. Accessories and spare parts • To ensure the machine safety only use original spare parts from Gerni or approved by Gerni. • High pressure hoses, fittings and couplings are important for the safety of the machine. Only use hoses, fittings and couplings recommended by Gerni.
suitable for outdoor use, and the connection has to be kept dry and off the ground. • Gerni recommends use of an extension cable drum when cable extension is needed which keeps the socket at least 60 mm above the ground. • Cables on extension cable drums should always be completely unwound to prevent overheating. Extension cables must comply with the below-mentioned requirements for length and cable dimensions: 1.0 mm² 1.5 mm² 2.5 mm² Max. 12.5 m Max. 20.0 m Max. 30.
• Always empty pump, hose and accessories of water after use of the machine and prior to storing. Maintenance and repairs WARNING ! • Always disconnect the electrical plug from the socket prior to maintenance, cleaning and repair. • Any repair should always be made in Gerni authorized workshop with original Gerni spare parts. • Do not attempt any maintenance not described in the instructions.
3 Before you start using your high pressure washer See the pictorial quick reference guide – unpacking. Illustration shows the operation elements and how to prepare your machine for use. A Operation elements 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Start/stop switch Water inlet with filter (2a) High pressure connection High pressure hose Electric cable Click&Clean spray lance Spray handle with lock (7a) Click&Clean Tornado nozzle (Classic 100.3, Classic 110.4, Classic 115.
4 Operating your high pressure washer B See the pictorial quick reference guide – operating your high pressure washer. 4.1 Connection of high pressure hose Attach the high pressure hose (4) to the spray handle (7). Detach the high pressure hose by pressing the button (A). B2 Mount the high pressure hose on the outlet (3). B1 4.2 Mounting of spray lance and Click&Clean nozzles B3 Push the spray lance (6) into the spray handle, twist ans release.
ditional filtering to secure that impurities are not sucked in. Hose length should be max. 3 meter and of minimum ½". To meet these requirements, Gerni recommends that you use the original Gerni suction hose kit. The Machine is designed for suction up to 50 cm above the water surface. • Position the machine at max. 0.5 meter above water surface. Detach the high pressure hose from the outlet.
6 Maintenance D See the pictorial quick reference guide - maintenance.
Symptom Machine stops Cause Fuse has blown Incorrect mains voltage Thermal sensor activated Nozzle partially blocked Recommended action Replace fuse. Switch off other machines. Check that the mains voltage corresponds to specification on the model tag. Leave the washer for 5 minutes to cool down. Clean the nozzle (see section 6.2) Fuse blows Fuse too small Change to an installation higher than the amp. consumption of the machine. You may try without the extension cable.
The benefits under this warranty are in addition to your national law of sale. Guarantee repairs are made on the following conditions: that defects are attributable to flaws or defects in materials or workmanship. (wear and tear as well as misuse are not covered by the guarantee). that the directions of this instruction manual have been thoroughly observed. that repair has not been carried out or attempted by other than Gerni-trained service staff. that only original accessories have been applied.
10 Declaration of Conformity Declaration of Conformity Product: High Pressure Washer Type: Gerni Classic 100.3 / Classic 100.3 S, Clasic 110.4, Classic 115.3 / Classic 120.
Classic 115.3 Classic 120.
Classic 100.3 14 3 2 2a Classic 100.3 S Classic 110.
B1 B2 B6 B7 B10 Max. 40°C B3 B4 B5 Max.
D1 D5 D2 D3 D4
AUSTRALIA: NEW ZEALAND: Nilfisk-Advance Pty Ltd Unit 1/13 Bessemer Street Blacktown NSW 2148 Accent Tools Ltd 232 Bush Rd Albany Auckland 0632 Phone: 1300 556 710 E-mail: sales@gerni.com.au Phone: 09 968 2610 E-mail: sales@accent-tools.co.
