Manual

Options / model variants

Original instructions

3 Before starting the cleaner

1. The safest way to lift the

machine is to use a fork-lift

truck The arrows in the il-

lustration indicate the best

places to position the fork.

2. It is also possible to lift the

machine by hand from the

pallet. Due to the weight

this work should be done

by at least three persons.

Your hot water pressure washer was thoroughly tested and adjust-

ed for optimum performance before it left our factory. The factory

is located at approximately 120m (390 ft) above sea level, and the

combustion settings are optimal for that elevation.

If your location is higher than 1200m (3900 ft) above sea level,

your burner may require re-adjustment for proper performance and

best fuel economy. Contact your dealer for assistance.

1. Before using the cleaner

for the first time, check it

carefully for any faults or

damage.

2. Run the machine only when

it is in perfect working con-

dition.

3. Set the brake.

4. The slope on which the

high pressure cleaner is

placed must not exceed

more than 10

in any direc-

tion.

3.1 Transport and assem-

bly

3.2 Combustion settings

3.3 Set the brake

CAUTION

Do not hold the plastic tank to lift the machine as it could become

detached from the frame.

The best places to hold the machine are:

• on the handle

• on the frame between the front wheels and the guide rollers.