User's Manual

Rev. 00 2-10
4. When the driver installation is completed, then restart your
computer.
2-4.2.2 Installing Cardwizard Driver in Windows
NT4.0
Installing CardWizard for Windows NT is a simple task. Just
insert the diskette into the appropriate drive and follow the
prompts on the screen. If you need assistance refer to the
instructions below:
1. If you have any PC cards currently installed in PC card slots,
remove them.
2. If your system is connected to a network, log off before starting
the installation.
3. Logon as an Administrator.
4. Carefully read the ReadMe file on the installation diskette.
5. Choose Run from the Windows NT Start button.
6. Enter A:\Setup.exe on the Open line in the Run dialog box.
7. Choose OK.
The installation program starts and indicates that Setup is
preparing for the installation.