User's Manual
Table Of Contents
- 3-1 Introduction
- 3-2 Running SETUP and Moving Around
- 3-2.1 Main
- Moving Around and Making Selections
- Using the Keyboard
- Main Menu
- Fast Boot
- Boot Sequence
- COM Port
- IR Mode
- LPT Port
- LPT Extended Mode
- Save To Disk Warning Message
- Keyboard Numlock
- Pointing Device (PS/2 Mouse)
- Hot Key Beep
- Cache Systems
- 3-2.3 Security Menu
- System Password
- SCU Password
- F
- Virus Alert
- BootSector Protect
- 3-2.4 Power Menu
- Enable Power Management
- Max Performance/Balanced Power Saving/Max Power Saving/Customize
- Customizing Power Management Features
- Hard Disk Time-Out
- Standby After
- Suspend After
- Suspend Data to
- Battery Low Warning Beep
- VGA Activity
- Resume on Time
- Hour/Minute/Second
- Intel® SpeedStep
- 3-2.5 Exit Menu
Rev. 00 3-12
3-2.3 Security Menu
The Security pull-down menu, as shown below, contains the Security
settings that safeguard your system against unauthorized use.
The followings describe in sequence all the items of the Security menu.
System Password
The “System Password”item allows you to set the password for your
system. The password is required for starting up the system and running
the SCU program.
When the item is selected, the submenu will display as shown below.
When setting a password, first make sure that Num Lock is off, then type
your password in the entry field and press [Enter]. Confirm your password
by typing it again and pressing [Enter].