User's Manual

8-10
錯誤
!
尚未定義樣式。
LAN Problems
I cannot access the network.
?? Make sure that the LAN driver is correctly installed.
?? Make sure that the LAN cable is properly connected to the RJ-45
connector and the network hub.
?? Make sure that the network configuration is appropriate.
?? Make sure that the user name or password is correct.
Modem Problems
The modem does not work.
?? Make sure that the modem driver is correctly installed.
?? Make sure that the telephone line is properly connected.
?? Make sure that the COM port in the communication software is
correctly set.
?? Turn off power management.
PC Card Problems
The PC Card does not work.
?? Make sure that the PC Card is correctly seated.
?? If the card requires an IRQ (interrupt request), make sure that there is
one available.
?? The PC Card may be attempting to use a COM port in a manner that
conflicts with the COM port being used by another device. Try
running the SCU program to change the COM port setting. If your
PC Card uses COM1, set COM1 as Disabled. If your PC Card uses
COM2, set COM2 as Disabled. If your PC Card uses COM4, set
COM4 at Disabled.