User's Manual

Installing Software Drivers 6-7
Touchscreen Driver
System Hardware Detection
1. Click on “Start”, then “Settings”, then “Control Panel”, then “System”, and
select the “Device Manager” tab.
2. Under the item “Other devices” a question mark appears in front of the
sub-item “Unknown Device.”
3. Right-click on the item “Unknown Device” and click on “Properties.” When
the “Properties” window appears, click on “Reinstall Driver”.
4. When the “Update Device Driver Wizard” window appears, click on “Next”
and follow the onscreen instructions to continue.
5. When you are asked for the driver location, make sure the driver CD is in the
drive and specify the \W2000\TOUCHSCREEN\DMC9000.INF file.
6. When the “Digital Signature Not Found” window appears, click on “Yes” to
continue and exit.
7. Click on “Start”, then “Settings”, then “Control Panel”.
8. Right-click on “System” and select “Properties”.
9. On the “System Properties” window, click on “Device Manager”.
10. On the “Device Manager” window, “DMC9000” should appear under the
item “Mice and other pointing devices”. Right-click on “DMC9000” and
click on “Properties”.
11. Note the message on the window for “Device status” and make sure that
“Use this device (enable) should be selected on the “Device usage:”
window.
12. Click on “Close” to exit.