User's Manual

6-10 Installing Software Drivers
flash memory, SRAM, modem, LAN, and SCSI
cards.
To install the necessary driver/utility, just click on the particular option and
follow the onscreen instructions to continue and complete installation.
Touchscreen Driver
1. Insert the driver CD into the drive.
2. Click on “Windows NT”, then “Touchscreen” and follow the onscreen
instructions to complete the installation.
3. When finished installing, the driver should now be loaded and the “PenMount
Control Panel” window appears.
4. On the “Configure” tab, click on “Detect” to allow the system to
automatically detect the IRQ number and I/O address as well as select the
serial port. Click on “Apply”, then “OK”. You will be asked to reboot the
system to validate the required configuration.
5. After the system has finished rebooting, click on the “PenMount Monitor”
icon located on the taskbar to bring up the “PenMount Control Panel”.
6. Select the “Calibrate” folder and click on “Calibrate”.
7. Click on the four sides (points) and plus-sign “+” on the screen to calibrate
your touchscreen pen for use on the Tablet PC.
Modem Driver
1. Restart your system and quickly press F2 to enter the SCU Setup.
2. Enter the “Advanced” menu and select “COM Port (COM3/4)”.
3. Select the option “Touchscreen/Disabled”.