User's Manual

NOTE: For Combo/DVD Dual drive only.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Installing the Optical Drive
To install the optical drive:
1. Make sure that the computer is off.
2. Locate the optical drive bay on the left side of the computer.
3. Open the optical drive bay cover by pressing on both sides of the
release latch using your thumb and index fingers.
If no module is inside the drive bay
4. Insert the optical drive into the drive bay.
2-18 Operating Your Computer