User's Manual
Table Of Contents
- M230-0.doc
- M230-1.doc
- M230-2.doc
- M230-3.doc
- M230-4.doc
- M230-5.doc
- M230-6-0907.doc
- M230-7.doc
- M230-8.doc
- Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Battery Problems
- Bluetooth Problems
- Optical Drive Problems
- Display Problems
- Hardware Device Problems
- Hard Disk Drive Problems
- Infrared Problems
- Keyboard, Mouse and Touchpad Problems
- LAN Problems
- WLAN Problems
- Modem Problems
- PC Card Problems
- Power Management Problems
- Printer Problems
- Software Problems
- Sound Problems
- Startup Problems
- Other Problems
- Resetting the Computer
- Troubleshooting
- M230-A.doc
- M230-B updated.doc
2. Open the PC card slot cover by pressing on both sides of the release
latch using your thumb and index fingers.
3. Slide the PC card, with its label facing up, into the slot until the eject
button pops out.
Eject Button
4. When a new card is seated, the computer will detect it and try to
install the appropriate driver. Follow the on-screen instructions to
complete the process.
To remove a PC card:
1. Double-click on the Safely Remove Hardware
icon found on the
Windows XP taskbar and the Safely Remove Hardware window
appears on screen.
2. Select (highlight) the PC card from the list to disable the card.
3. Push the eject button and the card will slide out slightly.
4. Pull the card out of the slot.
4-10 Expanding Your Computer