User's Manual

Advanced Menu
The Advanced menu contains the I/O (input/output) configuration
settings of the system.
Serial Port COM1 enables or disables the serial (COM1) port. The
options are Enabled and Disabled.
Serial Port COM2 (FIR) enables or disables the infrared (COM2) port.
The options are Enabled and Disabled.
Serial Port COM3 (Touchscreen) enables or disables the touchscreen
(COM3) function. The options are Enabled and Disabled.
Serial Port COM4 (XBay) enables or disables the XBay (COM4) port.
The options are Enabled and Disabled.
Parallel Port enables or disables the parallel port. The options are
Enabled and Disabled.
HDD Heater sets if the system automatically turns on the built-in hard
disk drive heater for low temperature operation. The options are Enabled
and Disabled.
NOTE:
 To use the HDD heater feature, the MTCCTRL driver supplied with your computer
must be installed (see chapter 6 for details).
 Disable this item to conserve energy when using battery power.
5-6 Setup Configuration Utility (SCU)