User's Manual
Table Of Contents
- M230-0.doc
- M230-1.doc
- M230-2.doc
- M230-3.doc
- M230-4.doc
- M230-5.doc
- M230-6-0907.doc
- M230-7.doc
- M230-8.doc
- Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Battery Problems
- Bluetooth Problems
- Optical Drive Problems
- Display Problems
- Hardware Device Problems
- Hard Disk Drive Problems
- Infrared Problems
- Keyboard, Mouse and Touchpad Problems
- LAN Problems
- WLAN Problems
- Modem Problems
- PC Card Problems
- Power Management Problems
- Printer Problems
- Software Problems
- Sound Problems
- Startup Problems
- Other Problems
- Resetting the Computer
- Troubleshooting
- M230-A.doc
- M230-B updated.doc
Falling Time to Park HDD sets the time (millisecond) for EC to inform
SMI to park the HDD during an accidental drop. The options are 0
(disabled) to 127.
Free Drop Status specifies if the computer had been free-dropped. The
options are Yes and No.
CPU Thermal Control Sub-Menu sets the items that control various
CPU thermal parameters.
Summary Screen sets if the system configuration would be displayed
onscreen during system boot-up. The options are Enabled and Disabled.
Boot-time Diagnostic Screen sets if the system diagnostic screen would
be displayed during system boot-up. The options are Enabled and
Disabled.
SATA – Device 31, Function 2 sets the primary/secondary
compatible/enhanced SATA/PATA (serial ATA / parallel ATA)
controller in Legacy/Native mode. The options are Compatible and
Enhanced.
Setup Configuration Utility (SCU) 5-7