User's Manual

Using BIOS Setup 5-8
EMA/MEF Support is valid only for ACPI. Controls the EMA/MEF
device in an ACPI environment.
SATA AHCI Configuration sets the enhanced AHCI. Windows XP
Service Pack 1 + IAA driver supports AHCI mode.
HDD Heater sets if the system automatically turns on the built-in hard
disk drive heater for low temperature operation.
NOTE:
z To use the HDD heater feature, the MTCCTRL driver supplied with your computer
must be installed (see chapter 6 for details).
z Disable this item to conserve energy when using battery power.
HDD Protection enables automatic protection when computer with
HDD is dropped.
Falling Time to Park HDD sets the time for EC to issue SMI to park
HDD. The maximum is 127 in 5 milliseconds per unit. Set to 0 to
disable it.
Digitizer Type sets the digitizer type that comes with your computer
(AIP1040 WALTOP, WACF004 WACOM, or FPI2004 FPI).
Serial Port COM1/COM2/COM4 allows you to unconditionally
disable it when set at Disabled.
Boot-time Diagnostic Screen allows you to display the diagnostic
screen during system boot-up.