User's Manual

Installing Software Drivers 6-11
9. Press F10 to save your BIOS settings and exit.
10. Restart your computer.
11. During Windows setup, you will see a prompt “Press <F6> to install a
third-party SCSI or RAID driver.” Press F6, it may appear as if nothing
happened as a dialog box will not appear and you will not
immediately see a prompt.
12. Later, you will be prompted to select “S” for “Specify Additional
Device,” press S.
13. When prompted, insert the created AHCI driver floppy disk in to the
floppy drive and press Enter.
14. Select "Intel® 82801 GBM SATA AHCI Controller (Mobile
ICH7M)" and press Enter.
15. Continue the installation and press Enter when prompted. Leave the
floppy disk in the drive until the next reboot. The files may need to be
copied from the disk again during setup.
16. Follow the onscreen instructions to complete the installation of
Windows operating system.