User Manual
Table Of Contents
- M230-0.doc
- M230-1.doc
- M230-2.doc
- M230-3.doc
- M230-4.doc
- M230-5.doc
- M230-6-0907.doc
- M230-7.doc
- M230-8.doc
- Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Battery Problems
- Bluetooth Problems
- Optical Drive Problems
- Display Problems
- Hardware Device Problems
- Hard Disk Drive Problems
- Infrared Problems
- Keyboard, Mouse and Touchpad Problems
- LAN Problems
- WLAN Problems
- Modem Problems
- PC Card Problems
- Power Management Problems
- Printer Problems
- Software Problems
- Sound Problems
- Startup Problems
- Other Problems
- Resetting the Computer
- Troubleshooting
- M230-A.doc
- M230-B updated.doc
Powering the Computer
Turning On
1. Make sure the computer is connected to AC power.
2. Press the power button.
3. Each time the computer is turned on, it performs a Power-On Self
Test (POST), and the operating s
ystem such as Windows should
start.
Turning Off
To turn off the computer power, use the “Shut Down” command of your
operating system.
NOTE: There are other ways you can stop the computer so that you will be back to
where you left off when you next turn on the computer. (See “Stopping the Computer”
in Chapter 2 for information.)
CAUTION: If you have to turn the computer on again immediately after turning it off,
wait for at least five seconds. Turning the computer off and on rapidly can damage it.
Getting Started 1-5