User Manual

Troubleshooting 8-11
l Use the Web Manager/Telnet of the Access Point to check whether it
is connected to the network.
l Reconfigure and reset the Access Point.
I cannot access the network.
l Make sure that the necessary driver(s) is correctly installed.
l Make sure that the network configuration is appropriate.
l Make sure that the user name or password is correct.
l You have moved out of range of the network.
l Turn off power management.
Modem Problems
The modem does not work.
l Make sure that the device driver is correctly installed.
l Make sure that the COM port in the communication software is
correctly set.
l Turn off power management.
PC Card Problems
The PC card does not work.
l Make sure that the PC card is correctly seated.
l If the card requires an IRQ (Interrupt ReQuest), make sure that there
is one available.
The PC card stops communicating properly.
l The application may have been reset when the computer is turned off
or in Standby mode. Exit and restart the application.