User's Manual

Maintain Connection Hide the Maintain Connection setting for user profiles
Select to hide the Maintain Connection option in the Create WiFi
Profile
Advanced Settings. This Maintain Connection option
maintains the WiFi connection with a user profile after log off.
NOTE: The Maintain Connection option may be used with Nortel
VPN client when it is configured to Logoff on Connect.
NOTE: This setting is only applicable for packages running on
Windows* XP Client.
Maintain Smart Card
Connection
Maintain connection if smart card is unavailable
Select to maintain the connection if the smart card is removed
while the wireless device is connected to a network that uses
smart card credentials. The default behavior for the WiFi
connection utility is to close the connection that uses smart
card credentials if the smart card is removed. Turning this
feature On will cause the connection to remain connected
(unless re-authentication is required for another reason). Select
to maintain a connection if the smart card is removed while the
computer is connected to a network using smart card/SIM
credentials.
NOTE: This setting is only applicable for packages running on
Windows* XP Client.
Message On Radio
Toggle
Enable WiFi On Toggle Message on a user's computer
Select to enables a third-party application to notify a user that
the Intel® PROSet/Wireless WiFi Connection Utility WiFi On /
Off switch is disabled.
NOTE: This setting is only applicable for packages running on
Windows* XP Client.
Microsoft Windows*
XP Coexistence
Enable Microsoft Wireless Zero Configuration and Intel®
PROSet/Wireless WiFi Software to coexist on this system.
Select to prevent Microsoft Windows* XP Wireless Zero
Configuration Service from being disabled when the Intel®
PROSet/Wireless WiFi Connection Utility is enabled. Select to
allow coexistence.
NOTE: This setting is only applicable for packages running on
Windows* XP Client.