User's Manual

Persistent Connection
Select to Ensure that persistent connection and computer
policies are updated prior to user log on.
NOTE: Updating policies may delay the log on screen for up to
two minutes.
NOTE: This setting is only applicable for packages running on
Windows* XP Client.
Pre-logon Cisco Mode
Enable Cisco Mode during a Pre-logon
Cisco access points have the capability to support multiple WiFi
network names (SSIDs), but only broadcast one of these. In
order to connect to such an access point, an attempt is made to
connect with each profile. This mode of connecting to each
profile is referred to as Cisco Mode. Default is enabled. Uncheck
to disable.
NOTE: If enabled, the Pre-logon connection may increase the
connection time.
NOTE: This setting is only applicable for packages running on
Windows* XP Client.
Profile Connectivity
Disable user-profile switching
This provides control over user connection to administrator
profiles. Leaving this setting Off lets the user connect to both
user and administrator profiles. When turned On, the user can
only connect to administrator profiles, and the administrator
chooses which administrator profiles are available to the user,
as follows:
● Allow the user to connect to All administrator
profiles
● Allow the user to only connect to the First
administrator profile
NOTE: This setting is only applicable for packages running on
Windows* XP Client.