User's Manual

Auto Import
Allows a network administrator to easily move the selected
profile to other computers. When the exported file is placed in
the WiFi\AutoImport directory on another computer, the WiFi
connection utility automatically imports the profile.
NOTE: This feature is only available when configuring a user
profile. It is not available when configuring Administrator
Profiles.
Band Selection Here you can select the band to use for this connection profile:
● Mixed band (default): Select this to the have WiFi
connection utility attempt to connect this profile to an
available network with either of the two bands.
● 2.4 GHz band: Select this to have the WiFi connection
utility attempt to connect this profile to an available
network using only the 2.4 GHz band.
● 5.2 GHz band: Select this to have the WiFi connection
utility attempt to connect this profile to an available
network using only the 5.2 GHz band.
Mandatory Access
Point
Forces the WiFi adapter to connect to an access point that uses
a specific MAC address. Enter the MAC address of the access
point (BSSID); 48-bit, 12 hexadecimal digits. For example,
00:06:25:0E:9D:84.
Clear: Clear current address.
Password Protection 1. Password protect this profile (maximum 10
characters): Select to enable a password for the profile.
The default setting is cleared for no profile password.
2. Password: Enter a password. The entered password
characters display as asterisks.
3. Confirm Password: Reenter the password.
NOTE: Be sure to keep this password written down. If it is
forgotten, it cannot be reset.