User's Manual

2-18
Operating Your Computer
 Even when only an external display is in use, the cursor will move on the
external display if you touch the surface of the LCD display with the pen or
bring the pen close to the surface of the LCD display when the digitizer driver
is active. Therefore, do not touch the LCD display when only an external
display is in use.
 The active digitizer feature cannot be used in the BIOS Setup program or
when using the full screen in DOS mode.
NOTE:
 You can move the cursor by bringing the digitizer pen close to the screen,
without actually touching the screen’s surface.
 Do not move the digitizer pen too quickly. If the pen moves too quickly, the
cursor may be unable to follow its movement.
 If you cannot click on the edge of the screen, hold the digitizer pen
perpendicular to the display and try clicking again.