User's Manual

Expanding Your Computer 4-9
Using PC Cards
NOTE: To take advantage of the PC Card interface, the PC Card Controller driver
supplied with your system must be installed.
Your computer has one or two PC card slots that support CardBus
specifications. The slots can accommodate a type II card. Typical type II
cards are flash memory, SRAM, modem, LAN, and SCSI cards.
Inserting and Removing a PC Card
NOTE:
 Some PC cards require additional system resources. Before using such PC
card, you may have to free other system resources for the PC card.
 Although some PC cards can be inserted and removed without turning off the
computer, you cannot remove or install PC cards during Standby mode.
To insert a PC card:
1. Locate the PC card slot on the left side of the computer.
2. Slide the PC card, with its label facing up, into the slot until the eject
button pops out.
Eject button