User's Manual

Operating Your Computer 2-17

Using the DVD Drive

Your computer comes with a Super Multi drive. The drive can read from

and write to CD, DVD+, DVD- and DVD-RAM media.

CAUTION:

 When inserting a disc, do not use force.

 Make sure that the disc is correctly inserted into the tray, and then close the

tray.

 Do not leave the drive tray open. Also, avoid touching the lens in the tray with

your hand. If the lens becomes dirty, the drive may malfunction.

 Do not wipe the lens using materials with rough surface (such as paper

towel). Instead, use a cotton swab to gently wipe the lens.

FDA regulations require the following statement for all laser-based devices:

“Caution, Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.”

NOTE: The DVD drive is classified as a Class 1 laser product. This label is

located on the DVD drive.

NOTE: This product incorporates copyright protection technology that is

protected by method claims of certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other rights owners. Use of this

and is intended for home and other limited viewing uses only unless otherwise

authorized by Macrovision Corporation. Reverse engineering or disassembly is

prohibited.

Inserting and Removing a Disc

Follow this procedure to insert or remove a disc: