User's Manual

6-2 Installing Software Drivers
How to Use the CD
NOTE:
• The drivers may have been updated after this manual was published. For drivers
upgrade, please contact your dealer.
• You can always find README or document files on the CD. These files
contain the latest information from the software supplier. Please read the files
together with this chapter.
NOTE:
• This CD supports Windows 98, Windows 2000, and Windows NT 4.0. Other
systems are not supported.
• The available items may differ according to your computer model and operation
system.
• If you want to play MIDI file under WinNT, please install Software Table under
“d:\NT40\Audio\Cwave01_14.”
You can set up the following drivers from the CD:
!
Mitsumi USB Floppy driver
NOTE: If you are using Windows 2000, you will not need to install this driver. Windows
NT does not support USB device.
!
ATI VGA driver
!
Crystal Audio driver
!
Askey MDC (modem) driver
!
Realtek LAN driver
!
Alps Touchscreen driver
!
FIR driver
NOTE: If you are using Windows 2000, you will not need to install this driver. Windows
NT 4.0 does not support FIR.
!
Card Wizard driver
NOTE: If you are using Windows 98 or Windows 2000, you will not need to install this
driver.