RX10 USER MANUAL WWAN Module Brand Name: AirPrime WWAN Module Name:EM7305
Rugged Mobile Computing Solutions July 2015
TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. For the latest version of the manual, please visit the Getac website at www.getac.com.
Table of Contents Chapter 1 Getting Started .......................................................................... 1 Getting the Tablet PC Running .......................................... 2 Unpacking .................................................................. 2 Installing the Micro-SIM Card (Optional) and Battery Pack. 3 Connecting to AC Power ............................................... 5 Using the Tether .........................................................
Initializing the Battery Pack .......................................... 30 Checking the Battery Level .......................................... 30 Battery Low Signals and Actions .................................... 31 Replacing the Battery Pack .......................................... 32 Hot Swapping the Battery Pack .................................... 34 Power-Saving Tips ........................................................ 37 Chapter 4 Using Options and Peripherals .............................
Cleaning Guidelines .................................................... 62 Battery Pack Guidelines .............................................. 62 Touchscreen Guidelines ............................................... 64 When Traveling ............................................................. 65 Chapter 8 Troubleshooting ...................................................................... 66 Preliminary Checklist ....................................................... 67 Solving Common Problems ..
iv
Chapter 1 Getting Started Congratulations on purchasing this healthcare Tablet PC. This chapter first tells you step by step how to get the Tablet PC up and running. Then, you will find a section briefly introducing the external components of the Tablet PC.
Getting the Tablet PC Running Unpacking After unpacking the shipping carton, you should find these standard items: RX10 Tablet PC AC adapter AC power cord Battery pack Stylus Tether Driver disc Document(s) Inspect all the items. If any item is damage or missing, notify your dealer immediately.
Installing the Micro-SIM Card (Optional) and Battery Pack 1. Select models only: With the micro-SIM card’s chip side facing up and the beveled corner pointing to the slot, insert the card all the way into the slot. NOTE: To remove the micro-SIM card, just push in the card to pop-out and remove the card. 2. With the battery pack correctly oriented, attach its connector side to the battery compartment at an angle () and then press down the other side ().
CAUTION: Make sure the latch is correctly locked, not revealing the underneath red part.
Connecting to AC Power It is suggested that you use AC power when starting up the Tablet PC for the very first time. 1. Plug the DC cord of the AC adapter to the power connector of the Tablet PC (). 2. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (). 3. Power is being supplied from the electrical outlet to the AC adapter and onto your Tablet PC. Now, you are ready to turn on the Tablet PC.
Using the Tether A tether is provided for attaching the stylus to your Tablet PC. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by below). Then, insert the other end through the first loop (as indicated by below) and pull it tight. 2. Insert the other loop end to the tether hole on the Tablet PC (as indicated by below). Then, insert the stylus end through the loop (as indicated by below) and pull it tight.
7
Taking a Look at the Tablet PC NOTE: Depending on the specific model you purchased, the color and look of your model may not exactly match the graphics shown in this document. CAUTION: You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- , dust-, and fire-proof integrity. (Engage the locking mechanism if existing.
Ref Component Description See Also Or can be one of the below components depending on your model: Fingerprint Scanner Serves as the fingerprint verification, preventing unauthorized access to your Tablet PC. P. 39 NFC/RFID Reader Reads data from NFC devices and RFID tags. P. 43 Microphone Receives sound and voice. Light Sensor Senses the ambient light for automatic adjustments of the display backlight. Indicators Power Lights blue when the power is on.
Ref Component Description See Also occasions. P2 Button Opens or closes the OSD Control Panel. P. 56 When pressed longer: Serves as the Ctrl+Alt+Del keyboard keys. P. 68 Can be changed to another set of predefined functions using G-Manager. P. 57 Provides a keyboard key function for specific occasions. P. 80 Windows Logo Button Opens or closes the Start menu. Volume Up Button Increases the sound volume. Volume Down Button Decreases the sound volume.
Rear Components Ref Component Description See Also Tether Hole Stylus can be tethered to this hole. Stylus/ Digitizer Pen Serves as the input device by tapping on the touchscreen to make selections and enter information. P. 16 Bridge Battery Indicator Lights up if you unlock the battery latch while operating the compute on battery power. The indicator is intended to inform whether you can safely hot swap the battery pack. P.
Blinking in amber: The bridge battery charging is in an abnormal state. Ask for repair service in case this happens. Ref Component Battery Pack Description Supplies power to your Tablet PC when external power is not connected. Inside is the micro-SIM card slot (optional). Expansion Connector Reserved. Speaker Sends out sound and voice from your Tablet PC. Camera Lens Allows you to use the camera function. When the camera lens is in use, the indicator beside it lights up.
Ref Component Description See Also Micro HDMI Connector Connects a HDMI monitor or TV set. P. 46 Combo Audio Connector Connects a set of headphones or external speakers with amplifier P. 46 Supports a headset microphone with 4-pole TRRS 3.5mm jack. Power Connector Connects the AC adapter. P. 5 Top Components Ref Component Trigger Button (optional) Description Activates the barcode scanner for single barcode scanning. See Also P.
14
Chapter 2 Operating Your Tablet PC This chapter provides information about the use of the Tablet PC. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your Tablet PC. CAUTION: Do not expose your skin to the Tablet PC when operating it in a very hot or cold environment. The Tablet PC can get uncomfortably warm when you use it in high temperatures.
Turning On and Off the Tablet PC Turning On Press the power button ( ) for at least 2 seconds until the Power Indicator lights up. The Windows operating system should start. NOTE: By default, there is 2-second delay time for the power button. You can change the setting with the “Power Button Delay” item in the BIOS Setup Utility. (See “Advanced Menu” in Chapter 5.) Tapping the screen during startup may invoke a pre-boot menu (unless the default settings have been changed).
* “Sleep” is the default setting of the power button. You may change what the power button does in Windows settings.
Navigating on the Screen The screen of your Tablet PC is touch-sensitive. You can control the location of the cursor/pointer on the screen using the included stylus or your finger to communicate with the Tablet PC. CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use the included stylus or your finger. NOTE: An optical film has been attached to the screen before shipment.
Using Multi-touch Gestures You can interact with your Tablet PC by placing two fingers on the screen. The movement of the fingers across the screen creates “gestures,” which send commands to the Tablet PC. Here are the multi-touch gestures that you can use: Gestures ( Actions = finger down; = finger up) Pan (Scroll) Descriptions Use panning to see another part of a page that has scroll bars. or Drag 1 or 2 fingers up or down. Zoom (Pinch) Move two fingers apart/toward each other.
Gestures ( Actions = finger down; = finger up) Press and Tap Descriptions Use press and tap to access the shortcut menu. Press on target and tap using a second finger. Twofinger Tap The function is defined by applications that support the specific gesture. Tap two fingers at the same time (where the target is in the midpoint between the fingers). Flicks Flick left or right to navigate back and forward in a browser and other applications.
You can move the cursor by bringing the digitizer pen close to the screen, without actually touching the screen’s surface.
Using the Wireless Connection Features Using the WLAN The WLAN (Wireless Local Area Network) module supports IEEE 802.11ac, compatible with 802.11a/b/g/n. Turning On/Off the WLAN Radio To turn on the WLAN radio: 1. Make sure that the Airplane mode is switched off. You can control the Airplane mode using one of the below methods. Use the Airplane Mode button in the OSD Control Panel. For Windows 10: Tap Settings Network & Internet Airplane mode.
If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Connecting to a WLAN Network 1. Make sure that the WLAN function is enabled (as described above). 2. For Windows 10: Tap the network icon in the system tray. For Windows 7: Tap the Wireless Network icon on the taskbar. (An orange light in the icon indicates connections are available.) 3. In the list of available wireless networks, tap a network, and then tap Connect. 4.
2. If you have previously turned off the BT radio, use one of the below methods to turn it on. For Windows 10: Tap Settings Devices Bluetooth. Slide the BT switch to the On position. For Windows 7: Use Getac Quick Bar. To open Getac Quick Bar, tap and hold the Getac Utility icon on Windows taskbar and select Quick Bar. Tap the BT button in the Quick Bar (an X over the button means the radio is currently off). To turn off the BT radio: You can turn off the BT radio the same way you turn it on.
Using the WWAN Feature (Optional) A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your Tablet PC supports 3G and 4G LTE. NOTE: Your model only supports data transmission. Voice transmission is not supported. For instructions on installing the micro-SIM card, see “Installing the Micro-SIM Card (Optional) and Battery Pack” in Chapter 1. Turning On/Off the WWAN Radio To turn on the WWAN radio: 1.
To turn off the WWAN radio: You can turn off the WWAN radio the same way you turn it on. If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Setting up a WWAN Connection 1. Make sure that the micro-SIM card is inserted and the WWAN function is enabled (as described above). 2. Start the WWAN utility software (Skylight). 3. You can use the WWAN utility software to configure and use WWAN connections. See the online help for information.
Chapter 3 Managing Power Your Tablet PC operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter CAUTION: The AC adapter is designed for use with your Tablet PC only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your Tablet PC is for use in the country where you purchased your Tablet PC. If you plan to go overseas with the Tablet PC, consult your dealer for the appropriate power cord. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the Tablet PC.
Battery Pack The battery pack is the internal power source for the Tablet PC. It is rechargeable using the AC adapter. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack Guidelines” section in Chapter 7. Charging the Battery Pack NOTE: Charging will not start if the battery’s temperature is outside the allowed range, which is between 0 C (32 F) and 50 C (122 F). Once the battery’s temperature meets the requirements, charging automatically resumes.
Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. A software tool called “Gauge Reset” is provided for the purpose. Use the G-Manager program and select the Battery tab to find the tool.
Push-button Battery Low Signals and Actions The battery icon changes appearance to display the current state of the battery. Icon Battery Level Description Discharging The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level. Low The battery charge has reached the low-battery level (10% by default). Critically low The battery charge has reached the critical battery level (5% by default).
Replacing the Battery Pack CAUTION: There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the Tablet PC manufacturer’s battery packs. Discard used batteries according to the dealer’s instructions. Do not attempt to disassemble the battery pack. NOTE: You can hot swap the battery pack as described later in “Hot Swapping the Battery Pack.” 1. Turn off the Tablet PC and disconnect the AC adapter. (Skip this step if you are hot swapping the battery pack.) 2.
4. Fit another battery pack into place. With the battery pack correctly oriented, attach its connector side to the battery compartment at an angle () and then press down the other side (). The battery latch should be engaged in the locked position ( ).
CAUTION: Make sure the latch is correctly locked, not revealing the underneath red part. Hot Swapping the Battery Pack “Hot swapping” means you can safely replace the battery pack without shutting down while your Tablet PC is running on battery power. This is possible because your Tablet PC has an internal bridge battery. The bridge battery can sustain power for up to 1 minute, which should be long enough for you to replace the battery pack.
The appropriate temperature range for hot swapping the battery pack is between -10 C (14 F) and 50 C (122 F). Check the Bridge Battery Indicator after unlocking the battery latch. Replace the battery pack only when the indicator lights in green. A red light means the bridge battery level is too low for you to safely hot swap the battery pack. When the battery latch is unlocked, the display brightness level will be fixed at a low level and cannot be adjusted.
the charging source to only the external AC power. (For setup information, see “Advanced Menu” in Chapter 5 and the Charging Backup Battery item.
Power-Saving Tips Aside from enabling your Tablet PC’s power saving mode, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. When not using a connected device, disconnect it. Turn off the wireless radio if you are not using the wireless module (such as WLAN, BT, or WWAN).
Chapter 4 Using Options and Peripherals This chapter describes the use of optional modules and the connection of peripherals.
Using the Fingerprint Scanner (Optional) CAUTION: For optimal performance, both the scanning surface and the finger should be clean and dry. Clean the scanning surface when needed. (See “Cleaning the Fingerprint Scanner” later.) It is not recommended that you use the fingerprint scanner in a belowfreezing temperature. The moisture on your finger can freeze to the scanner’s metal surface when you touch it, resulting in a failed operation.
Enrolling a Fingerprint NOTE: You can enroll a fingerprint only after creating a password for the Windows user account. For Windows 10 1. Tap Settings Accounts Sign-in options. 2. On the right side under Fingerprint, tap Set up. 3. Follow the onscreen instructions to complete. For Windows 7 1. Log on to Windows as the user whose fingerprint is to be enrolled. 2. Double-tap iMD Fingerprint Reader on Windows desktop. 3. In the fingerprint configuration menu, tap Add another. 4.
5. Put any finger of your choice on the scanner surface. Keep the finger still until you’re asked to lift your finger and repeat the action again. Several scans of the fingerprint are required. NOTE: Put your finger in a natural position that matches the way you normally hold your device. 6. When completed, tap Finish. NOTE: For detailed information on the program, see the program’s online help. Fingerprint Logon NOTE: The fingerprint logon process can take a while.
Cleaning the Fingerprint Scanner You can use adhesive tape to remove dirt and oil from the scanner surface. To clean with cleaner: 1. Shut down the Tablet PC, disconnect the AC adapter, and remove the battery pack. 2. Slightly moisten a clean, lint-free cloth with household window cleaner. You can also use a cotton swab as an alternative. NOTE: Do not use paper products to clean the scanner. Do not use bleach, solvents, or abrasives. Do not directly spray the scanner. 3.
Using the NFC/RFID Reader (Optional) If your model has the NFC /RFID reader module, you can read data from NFC (Near Field Communication) devices and RFID (Radio Frequency Identification) tags. NFC/RFID reader NOTE: For enhanced applications and customization of the module, contact your authorized Getac dealer. The NFC reader requires specialized applications. For further information, ask your system administrator.
Using the Barcode Scanner (Optional) NOTE: For enhanced applications and customization of the module, you can use the Barcode Manager program. The maximum operating temperature for the barcode scanner is 50 C (122 F). If your model has the barcode scanner module, you can scan and decode most common 1D and 2D symbologies. To read barcodes: 1. Start your processing software and open a new or existing file. Place the insertion point (or called cursor) where you want the data to be entered. 2.
Connecting Peripheral Devices You can expand the capabilities of your Tablet PC by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. Slide down to open the protective cover. Connecting a USB Device Your Tablet PC has a USB 3.0 port and a USB 2.0 port for connecting USB devices, such as a digital camera, scanner, printer, and mouse. USB 2.0 USB 3.
Connecting an Audio Device For higher audio quality, you can send sound through an external audio device. The audio combo connector is the “4-pole TRRS 3.5mm” type (Apple iPhone Recessed) so you can connect a compatible headset microphone. SAFETY WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
Chapter 5 Using BIOS Setup BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. This chapter tells you how to use the BIOS Setup Utility.
When and How to Use NOTE: The actual setting items on your model may differ from those described in this chapter. The availability of some setting items depends on the Windows version your computer is running. You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware.
Method 2 (for Windows 7 models only): If a keyboard is connected, press the F2 key during system startup when the logo screen appears.
Menu Descriptions Information Menu The Information menu contains the basic configuration information of the system. There are no user-definable items in this menu. NOTE: The “Asset Tag” information appears when you have entered the asset number for this Tablet PC using the asset management program. The program is provided in the Asset tag folder of the Driver disc. Main Menu The Main menu contains the various system settings. System Date sets the system date. System Time sets the system time.
Advanced Menu The Advanced menu contains the advanced settings. Wake Up Capability USB Wake-Up From S3 allow a USB device activity to wake up the system from S3 (Sleep) state. Power Button Delay sets power button delay time (1 second or 2 seconds) so that accidental touching of the :power button does not cause undesired operation. You can also disable the delay. System Policy allows you to choose between Performance and Balance. If battery life is your first priority, select Balance.
Virtualization Technology) feature which provides hardware support for processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can utilize the additional hardware virtualization capabilities provided by this technology. Intel(R) VT for Directed I/O (VT-d) enables or disables VT-d (Intel® Virtualization Technology for Directed I/O). When enabled, VT-d helps enhance Intel platforms for efficient virtualization of I/O devices.
Set HDD 0 User Password sets the password for locking the Primary Master hard disk drive. After setting a password, the hard disk drive can only be unlocked by the password no matter where it is installed. TPM Setup Menu TPM Support enables or disables TPM (Trusted Platform Module) support.
Discard Changes restores the previous values for all the items. Saves Changes saves the changes you have made.
Chapter 6 Using Getac Software Getac software includes application programs for specific computer components and utility programs for overall management. This chapter briefly introduces the programs.
OSD Control Panel The OSD (On Screen Display) Control Panel provides a user-friendly interface for you to quickly activate or operate certain functions on your Tablet PC with a simple tap of the screen. To open the OSD Control Panel, start the program named OSDC. You can also press the P2 button on your Tablet PC to open it. The following screen appears. Help For detailed information on the program, see the program’s online help.
G-Manager G-Manager is a unified user interface utility that allows you to view, manage, or configure your computer features. With G-Manager, you can perform all or some of the tasks listed below. View system information. Check the battery status and configure the battery. Configure ECO modes (or called power profiles). Set the touchscreen sensitivity mode. Set if a warning message will appear when a connected docking station is removed unexpectedly.
Help For detailed information on the program, see the program’s online help.
Getac Camera Getac Camera is a geo-tagging camera program, which allows you to stamp geographical information on photos as watermarks and embed such information into JPEG/BMP files as EXIF 2.2 metadata. NOTE: Before starting Getac Camera, close any other program that uses the camera; otherwise, Getac Camera can only provide limited functions. Start Getac Camera. The Getac Camera window appears as shown below. By default, the program starts to determine your location using GPS positioning.
Chapter 7 Caring for the Tablet PC Taking good care of your Tablet PC will ensure a trouble-free operation and reduce the risk of damage to your Tablet PC. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling.
Taking Care of the Tablet PC Location Guidelines For optimal performance, use the Tablet PC where the recommended temperature is between 0 C (32 F) and 55 C (131 F). (Actual operating temperature depends on product specifications.) Avoid placing the Tablet PC in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Using in extreme environments for long periods can result in product deterioration and a shortened product life.
Do not place heavy objects on top of the Tablet PC as this may damage the display. The screen surface is easily scratched. Avoid touching it with a sharp object such as a pen or pencil. LCD image sticking occurs when a fixed pattern is displayed on the screen for a prolonged period of time. You can avoid the problem by limiting the amount of static content on the display. It is recommended that you use a screen saver or turn off the display when it is not in use.
– when using, charging, or storing the battery in high temperature condition To avoid hastening the deterioration of the battery pack thereby prolonging its useful life, minimize the number of times you charge it so as not to frequently increase its internal temperature. Charge the battery pack between 10 C ~ 30 C (50 F ~ 86 F) temperature range. A higher environment temperature will cause the battery pack’s temperature to rise.
When using battery power in an extremely low temperature environment, you may experience shortened operating time and incorrect battery level reading. This phenomenon comes from the chemical characteristics of batteries. The appropriate operating temperature for the battery is -10 C ~ 50 C (14 F ~ 122 F). Do not leave the battery pack in storage for more than six months without recharging it. Touchscreen Guidelines Use the finger or the included stylus on the display.
When Traveling Make sure that the battery pack is fully charged. Make sure that the Tablet PC is turned off. Disconnect the AC adapter from the Tablet PC and take it with you. Use the AC adapter as the power source and as a battery-charger. Put the Tablet PC in a protective case. Hand-carry the Tablet PC. Do not check it in as luggage. If you need to leave the Tablet PC in the car, put it in the trunk of the car to avoid exposing the Tablet PC to excessive heat.
Chapter 8 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the Tablet PC is causing the problem. Make sure that you turn on all peripheral devices before turning on the Tablet PC. If an external device has a problem, make sure that the cable connections are correct and secure. Make sure that the configuration information is properly set in the BIOS Setup program.
Solving Common Problems Battery Problems The battery does not charge (Battery Charge Indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. If the battery doesn't charge after it has been stored in very low temperatures, try disconnecting and reconnecting the AC adapter to solve the problem. Make sure that the battery pack is installed correctly.
Make sure that both devices are compatible. Display Problems Nothing appears on the screen. During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back. The brightness level might be too low. Increase the brightness. The characters on the screen are dim. Adjust the brightness and/or contrast. The display brightness cannot be increased.
Make sure if the device needs any jumper or switch settings. (Refer to the documentation that came with the device.) Check the cables or power cords for correct connections. For an external device that has its own power switch, make sure that the power is turned on. Power Management Problems The Tablet PC does not enter Sleep or Hibernation mode automatically.
4. Rotate the Tablet PC 360 at least three times around each axis (X, Y, and Z) as shown below. Software Problems An application program does not work correctly. Make sure that the software is correctly installed. If an error message appears on the screen, consult the software program’s documentation for further information. If you are sure the operation has stop, reset the Tablet PC.
Sound Problems No sound is produced. Make sure that the volume control is not set too low. Increase the volume. Make sure that the sound is not muted. Make sure that the Tablet PC is not in Sleep mode. If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced. Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound.
Check if there is high interference around the environment and solve the problem as described next. Radio interference exists. Move your Tablet PC away from the device causing the radio interference such as microwave oven and large metal objects. Plug your Tablet PC into an outlet on a different branch circuit from that used by the affecting device. Consult your dealer or an experienced radio technician for help. I cannot connect to another WLAN device.
Reconfigure and reset the Access Point. I cannot access the network. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. You have moved out of range of the network. Turn off power management. Other Problems The date/time is incorrect. Correct the date and time via the operating system or BIOS Setup program.
Resetting the Tablet PC You may have to reset (reboot) your Tablet PC on some occasions when an error occurs and the program you are using hangs up. If you are sure the operation has stopped and you cannot use the “restart” function of the operating system, reset the Tablet PC. Reset the Tablet PC by any one of these methods: Press and hold the P2 button for more than 2 seconds. This opens the Ctrl-Alt-Del screen where you can select actions including Restart.
System Recovery System Recovery (a Tool for Windows 7 Models) Use System Recovery when: The Windows 7 operating system does not start at all. You want to restore the system to the factory state. WARNING: Using this feature will reinstall Windows to your system and configure it to the system’s factory default settings. All data on the hard disk drive will be lost. Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems.
4. The progress bar shows the percentage completed. When it reaches 100%, the system turns off. 5. Turn on the Tablet PC. The Windows setup wizard starts. Follow the onscreen prompts to continue. 6. When the system restarts, the installer screen appears. The installer will perform system hardware detection and driver installation. 7. When completed, the system restarts and displays Windows desktop.
Using the Driver Disc The Driver disc contains drivers and utilities required for specific hardware in your Tablet PC. Since your Tablet PC comes with drivers and utilities pre-installed, you normally do not need to use the Driver disc. In case you want to manually install Windows, you will have to install the drivers and utilities one by one after installing Windows. To manually install drivers and utilities: 1. Start up the Tablet PC. 2. Prepare an external CD/DVD drive (with USB connection).
Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications CPU Intel® Core™ M-5Y71/ M-5Y10c Turbo Boost Technology BIOS Insyde, 16MB flash EEPROM, supporting UEFI, ACPI, TPM, vPro (optional), AMT10, computrace (optional), and security eraser RAM 4GB/8GB LPDDR3 1.2V 1600MHz SO-DIMM Video Controller Processor, 4.5W, UMA - Intel® HD 5300 Graphics Display Panel 10.
Parts Optional Specifications Barcode scanner, Tri Pass-through Wireless LAN + BT IEEE 802.11ac, compatible with 802.11a/b/g/n, BT 4.0 + EDR Camera Front: HD, blue LED Rear: 8M pixel, autofocus, blue LED, video capture GPS (option) UART WWAN (option) 3G/4G LTE(AirPrime EM7305) GSM900/1800/WCDMA/CDMA2000/LTE 900/LTE1800 NFC/RFID Reader (option) ISO15693, ISO18000-3, ISO14443A/B, Mifare, FeliCa™ Security TPM 2.
Button Function Up Down 81
Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your Tablet PC. NOTE: Marking labels located on the exterior of your Tablet PC indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.
On the Use of the System Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur.
Safety Notices About the Battery Caution Texts Concerning Lithium Batteries DANISH ADVARSEL! Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. NORWEGIAN ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner.
FRENCH ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Attention (for USA Users) The product that you have purchased contains a rechargeable battery. The battery is recyclable.
87
On the Use of the RF Device USA and Canada Safety Requirements and Notices Radio Frequency Interference Requirements and SAR This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency.
Finnish Tämä tuote noudattaa EU-direktiivin 1999/5/EC määräyksiä. French Ce produit est conforme aux exigences de la Directive Européenne 1999/5/EC. German Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 1999/5/EC. Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þ essi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC.
User Notification of Take-back Service To Institutional (B2B) Users in United States: Getac believes in providing our institutional customers with easy-to-use solutions to recycle your Getac-brand products for free. Getac understands the institutional customers will likely be recycling multiple items at once and as such. Getac wants to make the recycling process for these larger shipments as streamlined as possible.
ENERGY STAR ENERGY STAR® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from http://www.energystar.gov. As an ENERGY STAR® Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency.
Businesses that use ENERGY STAR® enabled office equipment may realize additional savings on air conditioning and maintenance. Over its lifetime, ENERGY STAR® qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually.
Battery Recycling For the U.S. and Canada only: To recycle the battery, please go to the RBRC Call2Recycle website or use the Call2Recycle Helpline at 800-822-8837. Call2Recycle® is a product stewardship program providing no-cost battery and cellphone recycling solutions across the U.S. and Canada. Operated by Call2Recycle, Inc., a 501(c)4 nonprofit public service organization, the program is funded by battery and product manufacturers committed to responsible recycling. See more at: http://www.
