User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
90
2. Turn on the computer. During system startup when the following screen
appears, press Ctrl + Alt + F2 keys for four second.
3. In the screen that appears, select Recovery to start the recovery process.
4. The progress bar shows the percentage completed. When it reaches
100%, the system turns off.
5. Turn on the computer. The Windows setup wizard starts. Follow the
onscreen prompts to continue.
6. When the system restarts, the installer screen appears. The installer will
perform system hardware detection and driver installation.
7. When completed, the system restarts and displays Windows desktop.