User's Manual

Operating Your Computer 2-15
Using the DVD Drive (Optional)
Depending on the model your computer’s swappable bay may contain a
DVD drive, usually configured as drive D. The Super Multi drive can
work both as a DVD-ROM drive for reading DVD (Digital Versatile
Disc) discs in addition to CDs, audio CDs and CD-R/-RW discs, and
CD-RW drive. Can also write to DVD+R/+RW/-R/-RW/DVD-RAM
discs.
CAUTION:
 When inserting a disc, do not use force.
 Make sure that the disc is correctly inserted into the tray, and then close the tray.
 Do not leave the DVD tray open. Also, avoid touching the lens in the tray with your
hand. If the lens becomes dirty, the DVD drive may malfunction.
 Do not wipe the lens using materials with rough surface (such as paper towel).
Instead, use a cotton swab to gently wipe the lens.
FDA regulations require the following statement for all laser-based devices:
“Caution, Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.”
NOTE: The DVD drive is classified as a Class 1 laser product. This label is located on
the DVD drive.
NOTE: For DVD and Combo drives only.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Inserting and Removing a Disc
Follow this procedure to insert or remove a disc:
1. Turn on the computer.