User's Manual

Operating Your Computer 2-25
To turn on the WLAN radio:
1. Make sure that the RF switch is at the ON position.
2. Press
Fn+F1 to turn on the WLAN radio (see “Fn+F1 Behavior” in
Chapter 2), indicated by the WLAN indicator (
) glowing in blue
when on.
If you need to temporarily turn off the radio, press
Fn+F1. To resume
network connection, press
Fn+F1 again.
It takes approximately 30 seconds for your computer to make a successful
WLAN connection and approximately 10 seconds to disconnect.
Connecting to a Wireless Network
To connect to a wireless network:
1. Make sure that the WLAN radio is on (see the previous section).
2. Right-click the Wireless Network Connection icon
located on the
Windows system tray and select Connect to a network.