User's Manual

Expanding Your Computer 4-19
Installing a Secondary Battery
Pack or Hard Disk Drive
You can purchase a secondary battery pack or hard disk drive to be installed
in the multi-purpose device bay.
1. Locate the multi-purpose device bay on the left side of your computer.
Slide the lock downward to the unlocked position (
) () and then
slide the latch toward the left (
) to open the protective cover.
2. Pull the strip and slide the existing device out of the bay.
3. With the strip facing outward, insert the new device all the way into the
bay.
4. Close the cover. Make sure the latch is engaged and slide the lock
upward to the locked position (
) completely, not revealing the
underneath red part.
Correct Incorrect (revealing red part)