User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Tablet PC
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Tablet PC
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Tablet PC
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
26
4. Select Firmware and pull down the list of mobile network operators.
5. From the list, select the name that matches your operator and firmware.
•
For the US region
•
: EM/MC7355 firmware is required. The supported
operators include ATT, Bell, Roger, Sprint, Telus, and Verizon. If your
operator is not one of them, select Generic_US_7355 in the list.
For the EMEA (Europe, the Middle East, and Africa) and APAC (Asia
Pacific) regions
6. Select OK to start configuring mobile broadband device. A message bar
appears on the screen to show the progress. Wait till the configuration is
completed.
: EM/MC7305 firmware is required. The supported
operators include Orange, Swisscom, Telefonica, Telstra, and
Vodafone. If your operator is not one of them, select
Generic_EMEA_APAC_7305 in the list.
CAUTION: Do not perform other tasks or shut down the Tablet PC during
the configuration process.
7. After the configuration, you can use WWAN connections. For more
information, see the online help of the software.